trying to clear old stuff out at the moment and came across these
first 24x ally mirror mounts, based on simon mill's design
they were made for me by a member on here, Austin I think his name was a long long time ago.
£2 per mount, each currently has a high quality 5mm by 5mm fs mirror on it, coated for red.
once locked up properly they are very stable
they measures
10mm wide
17mm high
20mm long (back to front)
second set are a load of brass mirror mounts based on the rgb lasersystems design
you have a left and right version
head bolts to the base via an m3 allen key screw, the whole head can slide up and down and the head can be mounted in two different ways. facing the front of the back, the head also has a 1mm lip on it for mounting cubes straight.
machined from a solid lump of brass, each surface is 5mm thick
I have a load of heads I was just to lazy to screw them all on for the photos.
they measure
13mm wide
20mm high
20mm long (back to front)
there is a 2mm hole in the head and base, this is to insert and allen key or screw driver to help adjust the mirror mount
£5 each
if there are no takers for these mounts they are going down the scrappy