I've been doing some winter upgrades and as a result the contents of a couple of my projectors are available.
The 532 modules are 500mW CNI MGL-H DPSS heads.
Red/blue modules are custom builds by Chris Wood (logsquared) on the the forum.
They are machined from big blocks of aluminium and are really sturdy with great heatsinking.
They use Badpips dual channel drivers
They are currently fitted with a 2W M140 445 diode and a single Mitsubishi 500mW P73 diode.
You'll see that the red part of the module is built to take a second diode, so these could be upgraded and expanded - an M462 and a pair of P73 with a cube could give great output.
445 is corrected with anamorphic prisms, and red with cylinders in a novel tube mounting arrangement that allows them to be slid back and forth to control telescope length and rotated accurately. I think the collimators are G2.
Powers on the red and blue are turned down to suit my needs at the time, so ~1W 445 and 500mW 638. You could bump these immediately to 750mW 638 and 2W 445.
They need a bit more than 5V so i use 5V supplies with the voltage turned up.
I guess the logical way to sell these is as 2x RGB sets (I also have 3x Stanwax flexmounts with dichros/mirrors per set if required), but can split them up if thats how people want them
Set 1 SOLD
DPSS power was after 10mins running at 5V. Note all power was taken after optics.
Set 2 SOLD
Drop me a PM if you've any questions