I have sent an email to Melody but while I wait I figured I'd post here too, to see what people have to say. The first issue is minor and simply requires some color balancing. Unfortunately the 1800 doesn't come with external adjustments so I have to make the adjustments at the driver. I think I've asked this before but didn't get an answer so I'll try it again anyway, has anyone adjusted their Lightspace laser drivers that can offer any insight to the identity of the pots on the driver? I'm sure they have a variety of drivers but any advice is appreciated.
The second issue is a bit more severe and involves the scanning in one of the two projectors I bought in march. I'll see if I can attach some pictures but basically there is significant overshoot and wobble in the Y axis that gets worse as the scan rate decreases. I don't know enough about scanner amps to know if this is simply an adjustment issue or if it's an actual hardware or electrical issue. It looks like it could electrical noise translated from a faulty component but I don't know. I suspect if it was a grounding issue it should affect more than just the Y axis though. Any thoughts?
This video shows 30k scanner speed. The projector on the left is the one with the issue. Sorry the videos are short, I needed to include them in my email to Melody and I was limited to the file size.
The scanner speed in this video was reduced to 6k. The wobble is noticeably worse.