Results 1 to 2 of 2

Thread: Galvo driver for Cambridge Technology 6810P Galvo

  1. #1
    Join Date
    Jul 2016
    Location
    Dorset UK
    Posts
    40

    Default Galvo driver for Cambridge Technology 6810P Galvo

    Hi All,

    I have an assembly with a laser diode, Cambridge Technology 6810P Galvo and an F-Theta lens,

    The problem comes that I have no driver for the Galvo, I don't really have any experience with galvos at all. What would be the recommended way of me 'getting going' with this set-up as I'd like to give it a go getting this working.

    Would I need to buy a specific galvo driver for this unit, or would any off the shelf unit work, such as: ... Ah, I can't find one on ebay or Ali-express short of cashing out $$$ for a used unit with no guarantees. Seems I'm in a bit of a hole here.


    Regards,
    Thomas Williamson

  2. #2
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,446

    Default

    Contact Mixedgas here on the forum. He has a schematic for an amp you can build that will run that scanner. Alternately, you may be able to purchase compatible amps on E-bay. But again, defer to Steve as to which ones will work and which ones won't.

    Adam

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •