Results 1 to 3 of 3

Thread: Co2 laser wire stripper info

  1. #1
    Join Date
    Jul 2014
    Location
    Manchester, NH
    Posts
    24

    Default Co2 laser wire stripper info

    I have acquired a 2001, RtMc Laser wire stripper model: WD1LTC-50

    The system includes a Synrad Duo Lase 48-5 (50W) laser, chiller and filtered smoke exhaust system as well as some motion control and related hardware. Most of the hardware powers up and most of the interlocks are working. The control computer does not power up even though there is power applied to the computer.

    There seems to be a 12vdc relay loop which is not being energized. There are relays inside the computer chassis as well. Overall physical condition is very good.

    I would like test the laser before permanently altering the unit for my application. I plan to install a Nutfield 3axis scanner and use it for marking and cutting.

    Anybody familiar with this thing?

  2. #2
    Join Date
    Jul 2014
    Location
    Manchester, NH
    Posts
    24

    Default

    Update:
    Bypassed the non functioning loop.

    Chiller and exhaust fan/filter system working.
    Red alignment laser diode working. Beam shutters working.
    Laser is working. Measured 53.2W, 30VDC @26Amps

    Now for some fun. Move scanner from 15W Synrad to 50W Synrad. Soon I will be able to do some real work with the Nutfield galvos.

  3. #3
    Join Date
    Jul 2016
    Location
    New Jersey, USA
    Posts
    16

    Default

    Any more updates on this project ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •