Rebuilding my old analog console

[Greg]

These photos are of swept beating circles, similar to what is being discussed. In this case the the cycloid is computed PC side and saved as XYZ in a 3 track .wav file, which is then uploaded to the belas and appears in the 6B 3D universe. It will be a simple change to make the cycloid generator output XYZ-RGB files.

[Kevint]

Lasermaster1977 and Brian - yes and yes

Lasermaster 1977 - I was thinking along the same lines. Feeding the AM sweeped signal into another AD633 and AM modulating that signal, Brian - I did the the 2 oscillators as you described and did get the modulation working at a basic level. More experiments required.

Thanks you,

[lasermaster1977]

Lasermaster1977 and Brian - yes and yes

Lasermaster 1977 - I was thinking along the same lines. Feeding the AM sweeped signal into another AD633 and AM modulating that signal, Brian - I did the the 2 oscillators as you described and did get the modulation working at a basic level. More experiments required.

Thanks you,

By jove I think you've got it! "More experiments required". That's all there is to it!

[Kevint]

Been busy with family and church.

Started hardwiring stuff together. It is going to take a while to put all this stuff together, so my posts maybe infrequent. I am sill interested in adding rotation and other effects but that will come later. My goal now is to just get a stable working console with what I have. Everyone on this thread has been great and has made this project a reality for me - with sincerity, thank you.

Just playing around I got this image and thought it was interesting.