PDA

View Full Version : look for 8x RB moduul



RGB LASER VERKOOP
12-30-2012, 02:39
----------------

norty303
12-30-2012, 09:06
Joost, what filters are you using to combine the RB module with the 532nm beam?
All of the notch filters I've looked at have terrible losses.

swamidog
12-30-2012, 09:29
Hi Joost,

can you show me a picture of the spot at 10 meters? i'm curious about alignment and divergence.

thanks!


Hello laserist,

Who can make a nice small RB moduul for me;

Size is max 60mm wide ( for fit in my new XS Luminous RGB).
Power 2W 445nm, 500mW 635nm drive to 650mW safe.
with correction optics for get a nice beam.
this is a beamshow projector 20x20x20cm 4W
see:http://www.laserverkoop.nl/laserverkoop/afbeeldingen/newluminous%20XS%20RGB%202013.jpg

the projector is dust free, so the moduul can be a open model.
price, power, beamshape is more importend than a good looking housing.
email me info@laserverkoop.nl
we will test your moduul first and then order 8pc min.
laser greets joost

astatic
12-31-2012, 04:02
Why don't you ask Edison!?

kl79
12-31-2012, 05:58
if you need best price, may be you can ask him doing extra modul and sell some pieces ?

edison
12-31-2012, 06:10
I will post some beamshots of the combined later. Here are the beamshots for red:

swamidog
12-31-2012, 06:22
what are the distances for these two beam shots and what is the spot size in the near field photo?


I will post some beamshots of the combined later. Here are the beamshots for red:

edison
12-31-2012, 06:50
The distance is 26 meter and 30 means 30mm. At aperture is 10 cm in front of the module and the size is 4x4mm Its nice for beamshows and graphics at 10 meter or so but for the best beam single mode is just better but i think that everyone knows that by now. RGB laserverkoop asked me if i could build them and we made a deal. While everyone is playing with fireworks and look at the nice colors i,m finishing an RB module and hopefully we can see some colors tonight. *DZ

swamidog
12-31-2012, 07:05
that's a nice little module! thank you for the photos and the data.




The distance is 26 meter and 30 means 30mm. At aperture is 10 cm in front of the module and the size is 4x4mm Its nice for beamshows and graphics at 10 meter or so but for the best beam single mode is just better but i think that everyone knows that by now. RGB laserverkoop asked me if i could build them and we made a deal. While everyone is playing with fireworks and look at the nice colors i,m finishing an RB module and hopefully we can see some colors tonight. *DZ