problem fade in and out..

Hi all..!! My name is serge and i have a problem with my laser.
i use a 800 mw dls laser rgb. And use phoenix live as software.
now my problem is that i can't fade in and out the figures.
The laserbweams are on or of... no fade effect viseble..

Hi Serge,

Could be your projector is TTL and not Analog Modulation OR your software setting is setted for TTL
Can you give more details like Pictures?

Regards

Quote:

---

Originally Posted by laserheerlen

Hi all..!! My name is serge and i have a problem with my laser.
i use a 800 mw dls laser rgb. And use phoenix live as software.
now my problem is that i can't fade in and out the figures.
The laserbweams are on or of... no fade effect viseble..

---

Sorry whas a bsl burst 800 mw rgb laser.. i ask't the shop what kind of laser it is.
Waiting for the answer.
On internet there is no information about the laser diode they used.

At the sight of the laser projector (and its very low price), I guess the modulation is TTL only. Basically, under a fixed voltage diode is OFF. When modulation voltage is higher, diode is ON. This principle works for each of the 3 colors inside the laser.

With TTL modulation and 3 laser sources, you only have access to 7 colors.

Quote:

---

Originally Posted by MIIKKKLLLL

At the sight of the laser projector (and its very low price), I guess the modulation is TTL only. Basically, under a fixed voltage diode is OFF. When modulation voltage is higher, diode is ON. This principle works for each of the 3 colors inside the laser.

With TTL modulation and 3 laser sources, you only have access to 7 colors.

---

Thank you for the info.
Think also its a ttl.
The laser is cheap but does his job very well.
Maybe in the future i buy a analog laser.

I knew it would be a ttl :P
You can always upgrade your projectors components ;)