Printable View
Any ideas on electrical requirement or wire pinouts to convert an old Laserscope monitor to a vectorscope? The schematic I have shows 12 dc needed to run the monitor. Gonna jumper the wires with a battery and see what happens
.Attachment 53644Attachment 53645
I don't think the CRT internals are covered in the service manual. Here are the nine wires to the CRT (no color code). Is this the schematic you have?
Attachment 53646
You'd need a second deflection yoke and drivers for it, as usually flybacks are tied to the horizontal deflection circuit in this kind of CRT module. No flyback, no HV...
Steve
Bummer. It has such a nice bright green glow.
The vector games people have a new twist, measure the yokes inductance and make an inductor to connect in place of the yoke...Quote:
Originally Posted by MrNIFty923
Enjoy:
http://www.ukvac.com/forum/the-ampli...amplifergifone