Mitsubishi ML520G71...Red Holy Grail or Flashlight Fail ??

Printable View

Show 50 post(s) from this thread on one page

10-02-2011, 21:03
DTR

If I can find someone with a good testing setup for these that can do a continuous run with proper cooling and the willingness to document the process I would be willing to donate one to see how many hours it will last @ 700mA.
10-02-2011, 22:02
CDBEAM

1 Attachment(s)

Quote:

Originally Posted by flecom

4.5mm x 1.5mm is not bad at all... my 1W 655's are 5x5mm or 6x6mm cant remember... so you could take 3 of those diodes and knife edge them like ||| and still have a 4.5mm x 4.5mm beam!!!

Flecom...your idea...see my drawing. Might work ??? Slightly overdriven on the diodes...BUT...the new 500mW version is due out soon....so...IF those diodes have the same emitter size and other optical properties as the ML520G71....then...1500mW....and while I am being widly optimistic !!! go with twin sets...one going thru a wave plate...and combine all in a PBS....for 3W out the door at the 635 line...Yikes x 6 !!! Yes...I know....the cart is ahead of the horse...by a mile !!! Time will tell !!!

CDBEAM
10-03-2011, 00:10
taggalucci

BTW, happy birthday Dave!
10-03-2011, 01:10
dave

Cheers man :) A nice birthday present arrived today - 14pcs 63133's :D
10-03-2011, 03:22
dnar

Quote:

Originally Posted by dave

Cheers man :) A nice birthday present arrived today - 14pcs 63133's :D

Hey, Happy Birthday Dave! You kept that quiet! :cake:
10-03-2011, 05:18
taggalucci

Quote:

Originally Posted by dave

Cheers man :) A nice birthday present arrived today - 14pcs 63133's :D

Nice! Good choice :) How many will you be combining? I'm still planning a 12 diode build with these once I can find the funding...
10-03-2011, 08:21
steve-o

Quote:

Originally Posted by DTR

If I can find someone with a good testing setup for these that can do a continuous run with proper cooling and the willingness to document the process I would be willing to donate one to see how many hours it will last @ 700mA.

If someone can can put a TEC/ heatsink on it, I work in a lab and can supply 1 CC PS. Should be able to set it up running 24/7 until it dies. Documentation would be a couple of times per day. Nothing at night. No power meter tho. The one I have at home is a home-brew and not probably as accurate as is needed if periodic power measurements are needed (which I suspect will be ) .

PS- Happy B'day Dave! :)
10-03-2011, 08:35
DTR

Quote:

Originally Posted by steve-o

If someone can can put a TEC/ heatsink on it, I work in a lab and can supply 1 CC PS. Should be able to set it up running 24/7 until it dies. Documentation would be a couple of times per day. Nothing at night. No power meter tho. The one I have at home is a home-brew and not probably as accurate as is needed if periodic power measurements are needed (which I suspect will be ) .

PS- Happy B'day Dave! :)

Yea I forgot to add that. I would be looking to have power readings as well to document any degradation. Happy B'day Dave.:beer:
10-03-2011, 10:55
andyf97

Would it not be better to start first by reducing the beam size of each diode without thinking too much about final divergence, combine a few of them, then align and telescope them all after?
10-03-2011, 11:02
steve-o

Quote:

Originally Posted by CDBEAM

...BUT...the new 500mW version is due out soon....so...IF those diodes have the same emitter size and other optical properties as the ML520G71....then...1500mW....

I think I read that they are the same emitter size.. wow 0.5W per diode. When are they due out? Anyone know? Prices?

Show 50 post(s) from this thread on one page