Quad Laser Module Kit by Edison (USA Version)

Printable View

Show 50 post(s) from this thread on one page

05-22-2011, 16:15
catalanjo

Quote:

Originally Posted by edison

I have plenty of LPC822,s so if you need those let me know. I have good results with them. I have build a quad red and that was nice and stable on 950mw after losses*retardo

Thanks for the offer Johan but I would really prefer the extra boot of the 826s, always assuming the price is reasonable. >:)

Any idea when the quad kits will be ready for shipping ? :confused:

Cheers :)
05-25-2011, 14:35
edison

Not exactly sure but i can confirm that the manufacturing has started. They will be ready soon:)
06-01-2011, 09:31
edison

5 Attachment(s)

Almost there guys!!! I have picked up the parts and i assembled one to show how it looks. I have to order some extra grubs so i think i can start with shipping. The topcover is an option but it sure makes a nice finish.*retardo
06-01-2011, 10:33
dilbert

Excellent! This is the last piece I need holding up my build. :D:D:D
06-01-2011, 11:00
catalanjo

This is great news Johan! *DZ

Do the lenses glue into the barrels or is there an internal thread and retaining ring? :confused:

I am still in UK for ten days at least so if they are ready you can ship to my London address. :cool:

Thanks!

Cheers :)
06-01-2011, 11:02
edison

I have a few extra in stock but not many. Very happy with the quality from the metalshop. With the topcover its really a complete module. And its great because its flexible in use. Normally you buy a module and its not re-useable so when there are new reds available with this kit you can just swap the boards. If 500mw reds are available then you can swap the boards and build a 2 watter*retardo

I think that its allot better then invest in a red module and then suddenly find out that a manufacturer use 24 640nm diodes in a projector that cost half of your quad module.

Just imagine when green diodes are available :rolleyes:
06-02-2011, 10:32
Robin

What is the beam exit height on these? It would be nice to get a mount of the proper thickness fabricated so I can get these modules integrated into my projector as quickly as possible.
06-02-2011, 10:45
edison

2 Attachment(s)

The kit comes with a baseplate like this:
Because the module has diodemounts you can set in height you can do the stacking of the beams at the height you want. Of course that,s within limits. I will measure the minimum and maximum height for you;)
06-03-2011, 20:55
300EVIL

Well, I finally got mine together and worked out the details on construction. All I can say is VERY NICE! :cool: It's very easy to align but took some fiddling with the mirrors to get the beam height and profile correct. I was able to get the output beam about 2X2mm and the divergence is awesome with the Optima lenses.

http://i512.photobucket.com/albums/t...d/DSC_0223.jpg

http://i512.photobucket.com/albums/t...d/DSC_0283.jpg

http://i512.photobucket.com/albums/t...d/DSC_0243.jpg

As for the numbers.... I was able to get over 1W @ 500mA per diode running a FM3 with 5VDC @ 2A. Not Bad! I could crank it up to 600mA per diode but the FM3 requires about 6V and I really like to run my diodes conservative.

http://i512.photobucket.com/albums/t...QuadMeters.jpg

I accidentally hit my fiberglass sink for about 30 seconds at about 20 feet, This will give you a better idea of the beam profile from the hole it made... LOL!

http://i512.photobucket.com/albums/t...d/DSC_0316.jpg

http://i512.photobucket.com/albums/t...d/DSC_0320.jpg

Here is the finished module. It will run rock stable for hours around 1,015mW +/- 3mW.

http://i512.photobucket.com/albums/t...d/DSC_0325.jpg

http://i512.photobucket.com/albums/t...d/DSC_0327.jpg

Enjoy! *retardo
06-03-2011, 20:59
allthatwhichis

http://www.photonlexicon.com/forums/...6&d=1275541633 Dammit man; I got four 826 diodes here that need a home just like that... but... http://www.photonlexicon.com/forums/...0&d=1262150006
06-03-2011, 21:08
300EVIL

Quote:

Originally Posted by allthatwhichis

http://www.photonlexicon.com/forums/...6&d=1275541633 Dammit man; I got four 826 diodes here that need a home just like that... but... http://www.photonlexicon.com/forums/...0&d=1262150006

I know what you mean..... Man, this is the first laser I've built for myself in like 2 years. :p I got an extra kit coming. Maybe we can work "something" out, I owe you... :cool:
06-03-2011, 21:16
dnar

Hey Adam, did you use LPC815 or 826 diodes?

I got 1270mW @500mA per diode with G2 lens... Maybe your knife edge setup is cropping more beam than I have. 2x2mm is nice!!!! *retardo
06-03-2011, 21:30
300EVIL

Quote:

Originally Posted by dnar

Hey Adam, did you use LPC815 or 826 diodes?

I got 1270mW @500mA per diode with G2 lens... Maybe your knife edge setup is cropping more beam than I have. 2x2mm is nice!!!! *retardo

Really?!?!?! :eek: That's interesting news. These are the LPC-826 diodes, the knife edging is clipping the beams but I'm using Optima lenses and dielectric mirrors. It could be that I'm loosing 200mW from the knife edging but those are impressive numbers. My module does make around 1.150W when I first turn it on but it roughly settles to 1W after the diode mounts are heat soaked. With that added to the equation, it's about right I guess. I like it tight.

I'm a little hesitant about going to 600mA but I may do it. My LPC-815's have been running happily in my projector outputting 225mW a piece for 2 years.
06-04-2011, 00:12
edison

Adam, i must say i,m impressed with the quality of your build. I like the sollution with the balast resistors. The negative bridge wire is not needed because the brass block already is connecting the diodes together but you can never be to sure;)

A 2x2 beam with 1012mw is a very nice result!!! *retardoBoth the 405g2 lens and the optima lens have a FL of 4 so the beam diameter is the same from 1 diode. Dnar has an higher output but that is with no clipping and the setup from adam has a 2x2 beam and with such a tight beam clipping is nessesary. Also cleaning the mirrors with First contact is will give some more power. I cleaned the mirrors with Purosol but cleaning the mirrors with first contact gives the maximum result. If the beam from adam after stacking is 3x3 or 3.5x3.5 you will see that the output increases.

Because the diodemounts are slidable you can stack the beams like how you want them. With no powerloss with stacking you get a beam of 3.8x3.8. It still fits your mirrors easily so i prefer that. But its just a matter of taste. :rolleyes:

For people who want to experiment, you can mount the setup also directly on the baseplate with no tec in between. Rob stanwax tested one of my setups with the same mirrormounts and nothing moves even if things get warm. I also am curieus if there is power drop without tec after having it fired up for a few hours.

Great to see that we are now getting to a point where everyone can have a quad without worrying about allignment. >:)
06-04-2011, 02:57
hobbybob

Finally all your hard work pays off Edison.
Really like the review 300EVIL did there.
Very cool, like the numbers, 2x2mm damn that's TIGHT !

Interested in what TEC you used ?

Excellent work, kudos to both 300EVIL and Edison !
06-04-2011, 03:00
tonyaztec

Looking good, well done to you both.

I cant wait to start to build my pair>:)

Then I can start to build my first RGB

Tony
06-04-2011, 09:58
Stuka

Quote:

Originally Posted by 300EVIL

Well, I finally got mine together and worked out the details on construction. All I can say is VERY NICE! :cool: ...Enjoy! *retardo

SWEET!
Getting excited about the upgrade... ;) >:)
06-04-2011, 11:10
edison

still 2 housings for sale that are the same as 300evil and michelrietveld have so they fit this kit *retardo:

http://www.photonlexicon.com/forums/...ings-Picodrive
06-04-2011, 19:06
dnar

Quote:

Originally Posted by 300EVIL

I'm a little hesitant about going to 600mA but I may do it. My LPC-815's have been running happily in my projector outputting 225mW a piece for 2 years.

Don't run them at 600mA!!! Did you not see my post a week ago, I soak tested 4 x LPC-826 24x7 @600mA. After around 800 hours, 3 of the 4 failed.
06-06-2011, 03:38
catalanjo

Quote:

Originally Posted by edison

Almost there guys!!! I have picked up the parts and i assembled one to show how it looks. I have to order some extra grubs so i think i can start with shipping. The topcover is an option but it sure makes a nice finish.*retardo

Hi Johan, have mine shipped already or do you have a pecking order for shipment ?:confused:

Cheers :)
06-06-2011, 07:46
edison

I ordered the screws and grubs today because i was low in stock of the grubs.I didn,t ship anything but i,m planning to make a start in the next few days to assemble them. I also have to check if i have enough circuitboards. Because my cases and a prototype of a new quad blue that is being manufactured as we speak i,m quite busy. :o The case needed a sliding window cover and i made the drawing yesterday. *retardoThere where no screws anyway to assemble the kits. I,m pretty sure the first ones will ship out next week when i have the screws and grubs:)
06-06-2011, 12:50
edison

To make it easy for the misses to make the invoices and not to forget anyone. :o

I would like to ask if everyone can send me a PM with your normal name, PL name and adress and country. Although i send all the kits from the US buyers to Adam i will include the invoices so i need your details. We have most of them but it would be very convinient:)

So if possible please send me a PM with you details. I have started with assembling the kits;)
06-07-2011, 03:40
gashead

Gidday!

I don't suppose anyone in Europe has 4x of the Optima lenses going spare ? (Otherwise I'll order direct from them)

And, anyone got a Flexmod ? :P

Kind Regards,

Nige.
06-07-2011, 03:48
LaNeK779

Quote:

Originally Posted by gashead

(Otherwise I'll order direct from them)

well, good luck with that. i couldn't get them to even answer my mail...
06-07-2011, 06:28
dilbert

Nige, if you find a source here I could do with 8.

For the flexmod get your name down on LPF group buy.

Quote:

Originally Posted by gashead

Gidday!

I don't suppose anyone in Europe has 4x of the Optima lenses going spare ? (Otherwise I'll order direct from them)

And, anyone got a Flexmod ? :P

Kind Regards,

Nige.
06-07-2011, 08:22
edison

I have about 100 pieces but the problem is that i need them myself.:( I have about 25 quad that need lenses so i think its best to order directly from OPTIMA.;)
06-08-2011, 00:36
gashead

Quote:

Originally Posted by dilbert

Nige, if you find a source here I could do with 8.

Maybe I should start a groupbuy! :P (they have not responded to my emails)

Quote:

Originally Posted by dilbert

For the flexmod get your name down on LPF group buy.

Done, cheers! :)
06-08-2011, 01:31
olive13

Quote:

Originally Posted by edison

I have about 100 pieces but the problem is that i need them myself.:( I have about 25 quad that need lenses so i think its best to order directly from OPTIMA.;)

Hi Edison

Just for your information ,it's free ;): Panasonic "industry" have the same lens on their catalog
Model is :EYLGULF279
Common Datasheet is here:http://industrial.panasonic.com/www-...KB0000CE11.pdf

I think that Panasonic is the manufacturer

Thank you for your outstanding work:)

Olivier
06-08-2011, 08:37
edison

Thanks for the kind words:) Thanks for the info about the lens. I buy them in bigger quantaties and it might be worth cheaking out. ;)
06-08-2011, 18:25
catalanjo

Quote:

Originally Posted by dilbert

Nige, if you find a source here I could do with 8.

I could also use 8 if anyone can get it together! >:)

Cheers :)
06-08-2011, 20:34
edison

Maybe someone could contact panasonic and see what the price of the lenses in quantity of 100 and 200 pieces. I really have my hands full to get everything organised.
I,m also going to be a week on vacation very soon. Hopefully i can ship them before that.
But everyone needs a vacation sometime and so am i;)
06-12-2011, 03:31
edison

Just a quik update:

I ordered the screws today because i was low on stock. When the screws are arrived i can start assembling them and ship them out. So they will be ready soon;)
06-13-2011, 00:29
gashead

Re: lenses

Does anyone have an opinion on:

http://search.newport.com/?q=*&x2=sku&q2=KPA010 ?

Probably not the cheapest option...

N.
06-13-2011, 03:14
edison

I have ;) The lens is a Fl 6mm and will produce a Fat beam at aperture. The diameter is also 6.8 that won,t fit the retainers. You need a lens like a 405g2 lens with FL 4mm or the panasonic/optima lens. Adam can deliver the lenses. Send adam a PM.:)
06-13-2011, 04:20
gashead

Quote:

Originally Posted by edison

I have ;) The lens is a Fl 6mm and will produce a Fat beam at aperture. The diameter is also 6.8 that won,t fit the retainers. You need a lens like a 405g2 lens with FL 4mm or the panasonic/optima lens. Adam can deliver the lenses. Send adam a PM.:)

Cool, cheers.. no one likes a fat one (beam).

Cheers.

Nige.
06-14-2011, 10:10
Tracky

very nice laser! Any news about my order?
06-14-2011, 10:13
edison

The misses is working on it now!!!;)
06-17-2011, 04:17
dilbert

Just to say mine arrived this morning - although one module appears to have been 'examined' for want of a better word by the UK Border Agency :mad:

Lol it's only a dodgy looking package from the Netherlands........
06-17-2011, 04:29
Tracky

Today my quad modul arrived me! The best quality that I ever saw. Thank you for all! :)
06-17-2011, 09:51
dilbert

Ok, started building up my quad blue, alll going well so far.... But am i being stupid or is the printed legend for the diodes on the PCB the wrong way round which would mean marking for Anode is wrong?
06-17-2011, 09:55
danielbriggs

Quote:

Originally Posted by dilbert

Ok, started building up my quad blue, alll going well so far.... But am i being stupid or is the printed legend for the diodes on the PCB the wrong way round which would mean marking for Anode is wrong?

Yes .
06-17-2011, 13:16
gashead

Quote:

Originally Posted by danielbriggs

Yes .

Mysterious man of few words is Mr Briggs.

Now, being a n00b to this diode marlarkie, I got a question...

On a lpc822, which pin is the sodding Anode ?!?!

PS:

Johan, Module arrived today.. Fantastic work!! thanks !

Cheers,

N.
06-17-2011, 13:25
hobbybob

Here you go:

http://laserpointerforums.com/attach...in_out_001.jpg
06-17-2011, 13:49
danielbriggs

Quote:

Originally Posted by gashead

Mysterious man of few words is Mr Briggs.

Now, being a n00b to this diode marlarkie, I got a question...

On a lpc822, which pin is the sodding Anode ?!?!

Nige,
Not meaning to quote Run DMC, but:

It's like this:

Code:

o <--- Cathode o o ^ ^ | N/C or P/D if present | Anode

And that's way it is.
:cool:
06-17-2011, 13:58
hobbybob

Just the same like you press my link.... walk this way.... to stick with the RUN DMC theme (my childhood heroes...)
06-17-2011, 14:06
danielbriggs

Quote:

Originally Posted by hobbybob

Just the same like you press my link.... walk this way.... to stick with the RUN DMC theme (my childhood heroes...)

:good: :D
06-17-2011, 14:07
andy_con

MJ's better !
06-17-2011, 14:10
danielbriggs

Con. Don't start...
This is not the time nor the place for your Jackson nonsense. :poop:
(nowhere, past, present or future is BTW...)

This could get messy... :cowboy:
06-17-2011, 14:13
andy_con

messy?

what like litte kids all over the place ;)
06-17-2011, 14:26
gashead

Quote:

Originally Posted by andy_con

messy?

what like litte kids all over the place ;)

Sounds noisy to me.

Anyway, thanks go out to Jam master 'D' (x2)

*nyancat <---- wtf.. looks like a bit of toast, with a cat stuck in it, flying gay pride colours.

Show 50 post(s) from this thread on one page

All times are GMT -8. The time now is 08:14.