Group Buy Compact 506 Complete Set

Printable View

Show 50 post(s) from this thread on one page

05-27-2015, 08:18
SpitzSTP

Quote:

Originally Posted by X-Laser

Thanks to those who already picked up a set. We have about 15 left.

Cheers!

I placed my order today, count me in!
05-28-2015, 07:49
DanG

Just a quick update: We're down to around 12 sets, and I got a PM from someone who may way 6-8 sets. So assuming that happens we have 4-6 sets left.

Thanks again to those who picked up a set. We hope you love them!
06-02-2015, 17:13
Fearless

Just received my board and scanner. Beautiful job, great packaging. Is the I/O pin-out on the schematic correct, or is the board correct? +12 GND -12 does not jibe with the schematic. Also do you have the part number for the connectors? I get the ILDA output assignments, but what is Gnd/Ena/Flt for? Also simple instructions would be nice. Thanks!
06-03-2015, 05:54
araugh

2 Attachment(s)

Quote:

Originally Posted by Fearless

Just received my board and scanner. Beautiful job, great packaging. Is the I/O pin-out on the schematic correct, or is the board correct? +12 GND -12 does not jibe with the schematic. Also do you have the part number for the connectors? I get the ILDA output assignments, but what is Gnd/Ena/Flt for? Also simple instructions would be nice. Thanks!

This is all covered in the documentation that was supposed to come with your scanner set, I apologize if the person shipping forgot to include it. You can download the documentation here:

Attachment 47229 Attachment 47230
06-03-2015, 06:25
Fearless

Thanks! I can not wait to try them out.
06-03-2015, 09:12
Junktronix

Just ordered my set. Planning to swap them into my old home-built ~3W RGB which will benefit from the 4mm aperture. The displaced Cambridge 6215 scanset will be available soon :)
06-03-2015, 09:28
swamidog

Quote:

Originally Posted by Junktronix

Just ordered my set. Planning to swap them into my old home-built ~3W RGB which will benefit from the 4mm aperture. The displaced Cambridge 6215 scanset will be available soon :)

i have always wondered what it would be like programming abstract shows at 60k...
06-03-2015, 11:32
norty303

Quote:

i have always wondered what it would be like programming abstract shows at 60k...

I run my abstracts at 50k on my 506's, but i suspect the DT40 amps might be able to drive them harder.
06-03-2015, 11:41
swamidog

Quote:

Originally Posted by norty303

I run my abstracts at 50k on my 506's, but i suspect the DT40 amps might be able to drive them harder.

very interesting... i wonder how that works with the x-laser amps. fed-ex dropped off a little package for me yesterday, but it will be a while before i have to time to test it out.
06-03-2015, 13:50
dkumpula

I submitted an order as I've got another set of galvos that runs in a high temp environment that I'm starting to get concerned about failing soon. The 506's should handle a good thrashing in high ambient temps without wincing. :)

I'd like to get two more sets to replace some beam projectors with DT-30s , but I can't justify the fundage at the moment as they are ticking along nicely. . .

-David

Show 50 post(s) from this thread on one page