UKLEM 12 Bring and Buy

Not got anything useful yet to add to the table, but feel free to post your wears (just so i/we know to go to the bank before coming!) ;)

I'll start:
Scanpro20 DMX board
designed for >20k scanner

5 operation mode set by DIP switch.:DMX512,sound,self-test,animation, combination
picture effect,ˇ

3 laser Mod output, TTL

Axis resolution:8bit,-5~+5V,differential

ILDA auto switch

4 animtion,128 figure,32 combination picture effect inside

Power requirement: +15V / -15V

DMX control- 14channel

DIP switch table: sets operation mode
Attachment 29967

Anyone interested in a 30mW+ HeNe laser (about a meter long), ideal for holography? I have a 'spare' one here in 'as new' condition. If anyone's interested i'll bring it along.

I also have an 8' x 6' Fastfold projection screen with both front and rear projection screens all in a flightcase. I won't bring this unless anyone is interested as it's quite heavy.

What about a 20mW (110v) single line argon? anyone interested. I can let you have a suitable transformer with it (but it's bl**dy heavy - ask Simon ;))

I'll also bring a box of bits that i've accumulated over the years, may be some spare parts that folks can use in their projects.

Jem

I will have some E-Stop stations, A nice AC/DC Amp/Volt Clampmeter, A box of old Argon PSU bits and a ML Argon tube tube and a few other bits and bobs up for grabs.
I also may have a huge UPS system too, if I can get it working.

i might have an 8 diode 445 module for sale

Quote:

---

Originally Posted by smogthemog

I also may have a huge UPS system too, if I can get it working.

---

Tell me more more more...! "how do you like it, how do you like it?"
:D

Its a Meta Systems HF910 with the additional battery pack.

The main unit has 12x 12v 7Ah batteries in it and all the electronics gubbins :)
The remote battery pack has 27x 12v 7Ah batteries in it and HAS to be dismantled to make is movable, it's incredibly heavy! although when assembled both units are on wheels.

Not sure I have anything to sell, other than my body:p

See you there guy's, I'll be glad to get that bloody lump out the back of my van:car:

Quote:

---

Originally Posted by smogthemog

both units are on wheels.

---

Pwhoar... :cool:
Anything originally meant to be on wheels is fookin' A. >:)

I Think I have found the problem...........

Just cleaning it up, extracting the diodes and seeing what else is up. I'll get the fummit working you see :)

Quote:

---

Originally Posted by Jem

I also have an 8' x 6' Fastfold projection screen with both front and rear projection screens all in a flightcase. I won't bring this unless anyone is interested as it's quite heavy.

Jem

---

if you can make me a nice offer for this please pm me ;)