Who out there has the best way to reduce the poins from this logo without loosing details
I have a 30k scaner and traceit and I cant work it out need laser genuises to reply.
Attachment 24393
Printable View
Who out there has the best way to reduce the poins from this logo without loosing details
I have a 30k scaner and traceit and I cant work it out need laser genuises to reply.
Attachment 24393
does it need all the circles?
no circles if it cant be done
What is the best program to eliminate the points
sounds like you need ildsos ;)Quote:
Originally Posted by tony220171
i could give it a go tommrow eve when i get home from work
Any kind of text is always a killer as it requires a lot of points close together to achieve the letter shape.
I'd also take out the 3 circles representing the rim of the disc.
A plain single circle is enough and you take out around 400-600 points by removing 2 of the circles.
This is a points only view with 2 outer circles removed - still only 10 fps.
Its not hard to see where the problem lies ie the lower text:
http://img857.imageshack.us/img857/4825/problemu.jpg
If I type in the logo and then place a ring around it will the points still be the same
I bought that program but now have a new computer and the licence is for the other computer wast of cash.
What program do you use to trace yours whitelight?Quote:
Originally Posted by White-Light
Quickshow.
Badger and ILDA SOS are your best bet as you need to rationalise the text points.
hey tony have you tried this program http://c4r0.skrzynka.org/_hv/index.p...=lasers/RGB2.5
save your pic as a bitmap and give it a go , also sergy on the forum has some tools on the ftp.
if that does not work like i said i have lasercam to cature your pic and if it needs any further processing i have ildsos let me know how you get on,and i will try tomorrow for you
what software are you using that you cant transfer the license to your new computer ?
Its the ILDA SOS 1 licence no exeptions or you need to buy it again i emailed and got that reply....:mad:Quote:
Originally Posted by badger1666
I guess you can nevr buy an new computer again if you buy the ILDA SOS.....
Quote:
Originally Posted by tony220171
Solution: choose centerline traceing in TraceIt and start moving adjusting that slider a few times.
Start of on the left and move a rough bit to your right and keep an eye on the point count while doing so.
hey tony here 3 files converted for you at different fps and point counts
i dont have my projector running to test them ,let me know how they are i can always make adjustments
sorry about thread invasion
quickest way to put up files for al :):)
As above, quickest way to get this to Chris.
I think starting from here will solve your problems Chris.
Al.
Attachment 24402
Hi Badger thanks for your efforts but all the images come out scrambled and when i drop the scan rate to try and fix it it flashes to much the picture below shows the point where it dont flash but its messy.... cheers for your time its got me stumped.....Quote:
Originally Posted by badger1666
Attachment 24404
what speed are your scanners?
They looked ok on preview screen :confused:Quote:
Originally Posted by tony220171
I will fire up my projector at the weekend and look at it some more
I wont be beat ;)
Hey Tony, sorry you didn't see worthy value in ILD SOS. Many others have.
I give ILD SOS out free to free art producers here, so if you decided to go that route (and not typically ask for frames, or share frames that are not yours) hit me up for a copy.
There is a reduced cost for getting a license for a new computer for everyone, so low it's almost free. In addition, you can now tie your license to a RIYA card or QM2k card so even a new computer is not an issue.
Concerning your request, like others have said, 10 minutes of centerline tracing the text in inkscape will net you a nearly flicker-free result.
cheers and good luck.
"I give ILD SOS out free to free art producers here" I have been a member here for 3 years and always help out people when they ask for it..... I always post frames and shows WhAT tHE????Quote:
Originally Posted by drlava
@flecom 30K SCANNER