DT-40

Does someone have a close up photo of the original DT-40 amp? I have a list of what the pots do, and figure I would just edit a photo to add in what does what.

Thanks,
David

Damn... spec took my set home or I'd take a picture of mine... :o

Might need to resize a bit. ;)

http://www.photonlexicon.com/hostedc...t40amp/amp.jpg

Thanks for the photo Spec. Ok folks, I promised at FLEM that I would post what Bill determined were the pot assignments for the original DT-40's. When tuned, it will indeed display the ILDA test pattern properly at 30Kpps. Use this info at your own risk, if you are unsure or inexperienced at retuning an amp then you will most likely let the smoke out of the amp and scanner.

David

https://home.comcast.net/~djzurcher/DT-40amp.jpg

Outstanding!

I was hoping that information would make it onto the forum here. Thanks Spec and Dzurcher for putting it together in a nice, easy to review format.

(And big thanks to Bill Benner for figuring out what the pots do in the first place!)

Adam

Thanks dudes.
Anyone has for the DT40 Pro?

maybe Jian can tell about the pots ?

The 40pro's are copies of camtech 678 amps.

Ive got docs around here, have to find and/or scan them.

Here is the old version driver and current driver of pots.:):):)

Awesome! Thanks for reposting this Jian!

Jian !

Is there possible to get new Wires from the Driver to Galvos ?
The plug connector is not so good anymore..
One galvo somethines loss it`s signal becouse of the bad wire :o