Printable View
I made this file (it's a logo for a company)
There is 1732 frame points in it
I use a good laser (40K), but it always blinking and wrights the speed = 5fps
I did it in QS 2.5 Pangolin
Does anyone have an idea6 how to make this logo static?
Thx a lot, waiting for answer! :o
As far as I know QS support only 30kpps. If the file contains 1700 points played 5 times per second, the program gives you 8500pps. Increase scanrate in your QS to 30000 .Quote:
Originally Posted by Andrey
Oleger, thx, but, in QS I already made 200% Animation scanrate is 200%
it didn't help *(
Сan you put printskreen of your logo? Now I do not have opportunity to watch the file from QS.Quote:
Originally Posted by Andrey
Here is printscreen :(
This image is too complicated for the laser. QS optimizes it to 6000points (5 fps). As such, the laser will never draw this logo.Quote:
Originally Posted by Andrey
Thank you. It means - now there are no such good lasers?
And how many points should be to make it not blinking? )
Yes. Besides, no matter how good was your laser, QS not play more 30kpps.Quote:
Originally Posted by Andrey
And what kind of program I need? Because I'm ready for it. Another program will show this logo as in computer?
Andrey,
What kind of scanners are in your projector?
Improving that scanspeed will harm your visual quality by a lot.
You need someone to optimize that graphic to scan nicely and efficiently at 30kpps
Though please make sure your scanners are 30kpps and scan the ilda test pattern fine (blue circkle inside square touching the edges)
If yes to that latter answer I can help you out but it comes at a cost I'm afraid I don't really do as much free services anymore these days.
On a sidenote: even with extreme optimizations that logo will not be able to look exactly like what you want it to look right now.
Personally, I remove the detail from the main large letters so they're just outlines with no inner content and no double lining.
All those triangles are what is giving you a lot of the problems.
Maybe not exactly what you wanted, but they will scan a lot better like that. If you wanted mulitple colours you can always colour sections of the letter outline differently.
Also, I can't read Russian (sadly, I service many great bands and record labels from there), but I would remove either the blue and/or the red text... If you're just making a logo, you really shouldn't need a whole lot of extra information. I do like the price tag graphic though... Remove the blue and red text and you MIGHT be able to keep some of the triangulated parts in the logo...
Anyone wanna help this guy minimize the points in LaserBoy??
Your image is too complicated for 1 set of scanners.
You know I am pretty sure we tried to tell you all of this when you wanted help with your logo in another thread.
Here is the other thread: http://www.photonlexicon.com/forums/...ailable/page10
The only way you are going to get it to go the way you want it is to use more than one set of scanners to display different parts of the logo.
The deal killer here is the triangle detail in the text. Outlined text is a bit of a demand most of the time but adding the triangles (especially the separate triangles that do not share edges) is your big problem. If you spend a quite a long time hand tracing and optimizing by sharing the triangle edges you may be able to get it close to displaying OK on one set of scanners however I would recommend using at least 2 (if the image is hand optimized) if not 3 sets to display the image properly. Optimization is a bit of give and take sometimes where you have to yield some of the finer details in the image for a nice looking laser image.
You should not do more than 800 - 1000 points in the frame. Then it sholud be flicker free.
/Poul - Laser Power ApS
Denmark