Printable View
So my Etherdream just arrived and I only have LFI player (for now) and I want to test it out. I got it connected to my network and I downloaded the .dll for it and renamed that to EzAudDac.dll and ran the EzAudDac exe but I have no idea what I am doing. I read through the Etherdream website and a few forum posts but I don't know where to start.
Quote:
Originally Posted by Tomtortoise
One thing people always forget with LFI player is to turn on laser emission manually in the software, each time you start the program.
Steve
I have that clicked but other than that, I pretty much have nothing set up. I have the IP of the DAC but I don't know if I use that or a com port.
the usb port on the etherdream dac is only used for flashing the firmware.. the etherdream dac is addressed via ethernet.Quote:
Originally Posted by Tomtortoise
I have it connected to my computer through the LAN port and had it connected directly to my router earlier, nothing with either, not really sure why I said com port but that seems to be the only sort of connectivity option I can find in LFI.
Well I tried two computers and every setting I could in a few hours, I just had to turn off the firewall... Probably would have been good to try that first..
from the ether-dream website:Quote:
Originally Posted by Tomtortoise
Note: you may need to disable or adjust the settings on your firewall software to be able to communicate with the Ether Dream. The driver DLL uses TCP port 7765 and UDP port 7654.
Hi all,
I've been lurking these forums for a few months now, learning as much as I can from the wealth of knowledge here. I also just ordered an Etherdream DAC and I can't seem to get LFI player running smoothly. I would greatly appreciate it if someone could help me out. I can usually get a laser output for a few seconds, but then LFI player crashes and the laser turns off. Other times, LFI player crashes before any output is sent to the laser. I have been loading the default_fonts.ild file from the LFI player folder and another test pattern. Playing with the settings, it seems like some COM settings work better than others, but I really have no idea what many of these settings are telling me.
A few notes about my setup:
- "enable laser" checkbox marked
- I updated etherdream firmware from the website
- copied the etherdream.dll and renamed it as EzAudDac.dll in the LFI player folder
- Etherdream plugged into router
- the etherdream sitter sees the DAC on my network
- DHCP server enabled
- host computer set to static ip
- windows firewall disabled
- TCP port 7765 and UDP port 7654 forwarded on my router (not sure if these ports should be forwarded to(from?) my host computer ip, the DAC ip, or router ip but doesn't seem to matter)
- running windows 7 64 bit
The longest I can get a laser output is about 20 seconds before the program crashes. I've tried many different settings, but there are a lot of options that I just don't know anything about. Any help would be greatly appreciated.
Thanks!
LFI's creator lives in the "Pacific Northwest"... Perhaps call/email him.? Mike does not bite.
Steve
Problem solved. My wifi router is buggy. I was aware that my home wifi internet connection will cut out randomly but I was assuming it was my modem. As I was diagnosing the Etherdream I saw many millions of bytes of data sent and only about 0.01% bytes received by the etherdream. I tried plugging my computer into the router and then SUCCESS! LFI Player works!:cool: Now to get zoof games working...
i *strongly* discourage using etherdream or any network attached dac on wireless.Quote:
Originally Posted by Ferrous
I've had much more success with my Etherdream by taking the router out of the equation and connecting the Etherdream directly to my laptop with Ethernet.
Hi,
I´m having similar problems.
I´m trying to connect etherdream to my pc (windows 8, firewall off) directly. Network appear as unidentified and leds just blink once a second or so. When connecting to LSX there is no laser output (software laser button on).
I also tried to rename etherdream.dll (downloaded from their page) to EzAudDac.dll in LSX directory but still no laser output . Etherdream connection program said "online, idle" firmware v0.5.5 network: ok (1ms) Version: hardware2, software2 and ip address 169.254.163.57
Do I´m missing something?
cheers!
does LSX see the dac?
click the dac assign button on the left side of the LSX screen. it shows little RGB lines and says "123" under it. make sure "etherdream" is selected and click search for dacs. etherdream dac should show up either as unassigned or for timeline 1. if it shows up as unassigned, just drag it into the timeline 1 box.
Quote:
Originally Posted by Hamill
It´s solved. Sorry for such a noob question. I could not find this information on the LSX manual. Thanks!
As someone wrote in another post, I also can´t see LSX demo shows. Do I have to downgrade from v0.5.5 to v0.5.0 ?
could be related with the .dll´s?
Thanks for your help!
yes. flash the etherdream with v0.5.0 and protected show playback will work properly. there's just a version discrepancy since ED and LSX come from two different vendors.Quote:
Originally Posted by Hamill