Intensity

Hello, friends.

Why does it serve the connection "intensity" of the board, where laser modules and the galvos connect?
To mount an analogical projector is this connection in use?



Best Regards.

Juanma.

Intensity on an Ilda signal is the combination of red, green and blue signals. Depending on the source this signal can either be analog or TTL. Generally it's not used except when you only have one colour in the projector so you don't need to rerout your colour signals.

Thank you very much for his response.

Best Regards.


Juanma.

Quote:

---

Originally Posted by JohnYayas

Spaghetti sets the Intensity output to either full on or full off depending on whether or not any of the colors have output. This is so that if someone has a TTL scanner that is only hooked up to Intensity they will get output. I am not sure if that is the best thing to do but since I haven't encountered anyone who uses it I am not worried about it.

---

Why is it so instead of an option to set it to TTL or analog?

Many PCAOM drivers (NEOS for sure, and I think AA as well) require a TTL input in addition to the analog color input in order to turn on. The Intensity signal accomplishes this.

Adam

Hi, buffo.
These are my analog drivers, take an exit TTL also.

Attachment 47632

I have to connect intesity to the exit TTL; or only the connectors of analog in his corresponding place?


Best Regards.

Juanma.

And this board of connection ILDA.

Attachment 47633


Best Regards.

Juanma.

:cat:
Attachment 47634Just the analogue ! >:)
What colours do you have ?:question:
Cheers :)

Hello.

532nM/300mW
638nM/500mW
445nM/1000mW

Here it can see the process:

http://897524287421569307.weebly.com...acutegico.html


Best Regards.

Juanma.

:cat:
Just a couple of things:
Pintar base = Attachment 47635 conductividad termico aluminio = bueno:), pintura =malo!:(
Attachment 47637 Quitar pintura justo donde van los modulos laser, los soportes scanners y radiadors de la electronica !
!!!!!!!!!!!!!! Attachment 47638 !!!!!!!!!!!!
:tremble: No hay Obturador! *warn 1800MW es mucha canya :shock: te puede dejar frito! :sidefrown:

Attachment 47639 Imprescindible Obturador/Shutter ! sino Attachment 47640

TEXTO: :thinking:
Tarjeta de conexión con interfaz ILDA: "Su misión es conectar todo el cacharreo al D.A.C." = correcto! ;)
Attachment 47636 "para convertir la señal digital en analógica ". = El DAC es el convertidor no la tarjeta interfaz!
y de esta forma poder manejar sin problemas el software de show láser sincronizado con la música = *vigil OK

:confused:"a través de un sistema de audio Hi-Fi analógica" :confused2: ????

Cheers:)
PS. Donde stas ?

Hola.

Gracias por la ayuda, como puedes ver soy bastante neófito en el tema y se me escapan muchos detalles.

Quitaré la pintura de debajo de los módulos y sus moduladores.

Es el DAC quien se encarga de convertir la señal analógico/digital. Entendido! ahora lo corrijo... la tarjeta solo es para distribuir las conexiones.

No se como colocar un obturador.

El sistema Hi-Fi es analógico, por lo que tengo conectada una tarjeta de audio externa al portátil con el que reproduzco los shows utilizando Spaguetti; la salida de la tarjeta de audio está conectada a un previo en la salida TAPE 2 (bucle), que proporciona la señal de audio a dos etapas de potencia (bi-amplificación pasiva. Graves y agudos) así seleccionando esta salida en el previo puedo oír la música por el sistema de audio y el portátil pasa a formar parte como fuente de audio junto con el CD, el giradiscos y la pletina.

Aquí puede ver el sistema. Puede navegar colocando el puntero sobre las pestañas superiores.

http://897524287421569307.weebly.com...fidelidad.html

Soy de Barcelona (España) y no domino el inglés, utilizo un traductor y pido disculpas por los errores que pueda cometer al preguntar y/o contestar.

.................................................. .................

Hello.

Thank you for the help, since you can see I am enough a neophyte in the topic and many details escape from me.

I will remove the painting of under the modules and his modulators. It is the DAC who takes charge turning the sign analogical / digital. Understood! Now I correct it ... the card only is to distribute the connections.

Not as placing a Obturador/Shutter.

The system Hi-Fi is analogical, for what I have an external card of audio connected to the portable one with which I reproduce the shows using Spaguetti; the exit of the audio card is connected to the previous one in the exit I TAPE 2 (curl), which provides the audio sign to two stages of power (passive bi-amplification. Bass and Treble).
This way selecting this exit in the previous one I can hear the music for the system of audio and the portable one happens to form a part as audio source together with the CD, the turntable and the platen.

Here it can see the system. It can sail placing the mouse on the top windows.

http://897524287421569307.weebly.com...fidelidad.html

I am from Barcelona (Spain) and do not dominate the English, use a translator and ask for excuses for the mistakes that it could commit on having asked and / or to answer.


Best Regards.

Juanma.