a little help for a project way to ambitios for me

i wnat to build something to add a fairly unique look to my lights.

i have designed something that i want to make happen
i have a fan motor that i put a wooden dowl on instead of the fan and i want to put LED all the way across it and be able to remotely control them individully from my booth.

|o| o= led light
|o|
|o|
|o|
|o|
|o|
|o|
|o|
(||) (||)= reciever
|o|
|o|
|o|
|o|
|o|
|o|
|o|
|o|


think about a propeller for a airplane with leds on it.....At high RPMs it would appear to make a complete circle
how the heck do i control all of them???????

So you expect us to come up with a ready-to-go solution for you? Did you just join these forums to ask that question?

Have you tried google? It's a nifty little tool.
Try typing propeller clock in the text box and press enter. You'll have tons of info.

I would like to build a time machine that spits money from its exhaust pipe and runs on fresh air.
will you design it for me? Its way too big of a problem for me to tackle.

Rob

Quote:

---

Originally Posted by stanwax

I would like to build a time machine that spits money from its exhaust pipe and runs on fresh air....

---

OMG !
That's spooky !
I have one of these in my Garage.
http://lh4.ggpht.com/abramsv/R94S7qt...ab5255bd_o.jpg

By an amazing coincidence I have built in a small add on which turns a bit of dowling with LED's on.
It's quite a show.

I may bring it to the next meet (if I can get a trailer large enough and a PP9 for the LED's).
;)

In think the simple answer is you can't. With a spinning propellor you can't have a wired connection it would need to be wireless. Add the weight of a controller anywhere other than dead centre and you''l both unbalance the thing and subject the controller to considerable outward g forces as the tips will probably spin at several hundreds of miles an hour. The lawsuits from someone who gets hit by the controller could be quite interesting though.

If you want a propellor effect, but some of these and rewire the switches for remote operation: http://www.theglowcompany.co.uk/acat...-WINDMILL.html

Alternatively approach the manufacturer and aske them to make you a big one - much more expensive but much safer as then its them thats responsible for any injuries during normal usuage provided you've taken all the necessary precautions at your end.

A bargain at 3 quid.
Buy a few, line 'em up on a bit of wood, change the power source from batteries to an adaptor and you could trigger 'em by a DMX switch (or even an on/off switch).
Bung 'em on top of a lighting truss and it would be quite pretty. :)

http://www.photonlexicon.com/forums/...2&pictureid=77

joebone-

take a look at this:

http://www.youtube.com/watch?v=no2_M_b059g

Loooks suspiciously like stainless steel sink units between those big pipes.

Quote:

---

Originally Posted by FourDee

So you expect us to come up with a ready-to-go solution for you? Did you just join these forums to ask that question?

Have you tried google? It's a nifty little tool.
Try typing propeller clock in the text box and press enter. You'll have tons of info.

---

thanks for the help...lately ive been on laserpiointerforums but i cant seem to wrap my mind around how im goin to do this.... but really your answer helped allot

someone from there told me to come over here and try

Quote:

---

Originally Posted by RGBLaserFan

In think the simple answer is you can't. With a spinning propellor you can't have a wired connection it would need to be wireless. Add the weight of a controller anywhere other than dead centre and you''l both unbalance the thing and subject the controller to considerable outward g forces as the tips will probably spin at several hundreds of miles an hour. The lawsuits from someone who gets hit by the controller could be quite interesting though.

If you want a propellor effect, but some of these and rewire the switches for remote operation: http://www.theglowcompany.co.uk/acat...-WINDMILL.html

Alternatively approach the manufacturer and aske them to make you a big one - much more expensive but much safer as then its them thats responsible for any injuries during normal usuage provided you've taken all the necessary precautions at your end.

---

i tried to buy one of these to take apart and see how they do it but they dont ship to the US

i was thinking of something that might spin a little slower and i could walk the LEDs in from the outside as its spinning around. and turn on 2 of them to make 2 circles. but the clock is really cool and helps allot with this project. someone suggested i use wiper contacts. but i would have to use one for every bulb. gotta be one board in the middle and one board mounted on the other side of some kind of rotating contact or something.

i think....lol im really shooting in the dark..lol

Take a look at how a clothes washer or dish washer cycle system works. It a very complex cylindrical switch with many contacts. It's also motor driven to create the time base for the cycled events. I would start working with PVC pipe and copper foil made for leaded glass work. You could use gold jewelry wire to make the contact whiskers. You could even get the copper gold plated.


James. :)

http://www.flashingblinkylights.com/...ns-p-1728.html

or maybe

http://www.crazypc.com/products/cool...2-5680F12.html

Put a small microcontroller (for example, an Atmel ATmega16 would be perfect) in the middle with a wireless chip like the Nordic VLSI nRF24L01. Have it control the LEDs. Then your only problem is sensing the zero degree mark, which can be done using a Hall effect sensor and a small magnet attached to the frame. You'll have to power the thing either with slip rings (kinda sucks, hard to get right) or batteries on the rotor (also sucks).

You will need to learn:

- how to build microcontroller circuits
- how to program microcontrollers
- how to make the whole thing robust enough to run for a couple of hours without breaking
- how to stop people getting maimed by it when they try to touch it (and they will).

This is not a trivial project- you might want to try something else first...

They are called POV displays

Checkout Spacewriter not cheap though

http://www.spacewriter.com/images/Wa...imation150.gif

http://www.spacewriter.com/images/Fa...Fractal143.gif

Ive built a few of these before, they used to come as kit form and just do some simple LED patterns as it span. They had slip rights for power, and 1 slip ring for a "pulse" signal so the timer chip knew where it was.

or you could try some thing like this

http://www.ladyada.net/make/spokepov/

Quote:

---

Originally Posted by soforene

OMG !
That's spooky !
I have one of these in my Garage.
http://lh4.ggpht.com/abramsv/R94S7qt...ab5255bd_o.jpg

By an amazing coincidence I have built in a small add on which turns a bit of dowling with LED's on.
It's quite a show.

I may bring it to the next meet (if I can get a trailer large enough and a PP9 for the LED's).
;)

---

Egads, I wondered where THAT went...

Quote:

---

Originally Posted by joebone

i was thinking of something that might spin a little slower and i could walk the LEDs in from the outside as its spinning around. and turn on 2 of them to make 2 circles. but the clock is really cool and helps allot with this project. someone suggested i use wiper contacts. but i would have to use one for every bulb. gotta be one board in the middle and one board mounted on the other side of some kind of rotating contact or something.

i think....lol im really shooting in the dark..lol

---

If you're serious about this, look up two-wire control systems. They power the circuit on the far end, and communication is based on sensing the difference in current. It isn't the best way to explore the method but it might work, and if you manage it you'll have learned some very useful stuff. Bear in mind that you'll need at least a microcontroller circuit on the hub, and lines to each LED used, and a connection through the axle and a slip ring fitten on the hub or shaft laid on an insulating ring. And you won't be able to run it fast, or all hell breaks loose. Just strobing the LED's at modest speeds could be very cool, specially if you manage a chase light, so what you'd see would be a spiral of strobing points.

Probably more fun to make a laser comtroller though, which could do this and plenty more.