-
This is a very interesting idea, Mike! I'll be interested to see your results. Was the 635nm diode you refer to a 5.6mm can?
I would be interested in seeing what effect a narrow initial beam diameter will have on divergence using simple optics..
-
I don't see how. FAC stands for fast axis correction, and your typical LOC does not have a fast axis. If it had a fast axis, it could not be collimated with a single plano-convex lens. A 635 on the other hand does have a fast axis (right
)
-
With the exception of VCSELs and maybe some prototypes somewhere, all laser diodes have a fast axis and a slow axis. If you take a singlemode diode's uncorrected output and project it on to a surface, you can see that the output diverges faster on one axis than the other, creating an elliptical profile. The side which diverges the most is the fast axis. Any laser beam that is oval or rectangular is subject to these same qualities.
With singlemode diodes, the difference between the fast and slow axes is less than with multimode.
-
I think Xytrell means the same what I said before. The LOC's have typical 1 to 3 micron astigmatism what is close to nothing. So it is easy to collimate them with a spherical lens. 635nm diodes on the other hand are multimode and suffer much more from astigmatism. Another idea came to my mind, when you want the smallest possible beam what about microlenses or GRIN rods?
Edmund has some: http://www.edmundoptics.com/onlineca...productID=3145
The smalles has 0.45mm focal length and 0.55NA !
-
Not all 635nm diodes are multimode. There are plenty of singlemode 635nm diodes.. Astigmatism that is "close to nothing" and actually "nothing" are two different things.
You're both right that the astgmatism isn't as bad with singlemode diodes, but it's still there, so I'm curious to see if MechEng can improve on the elliptical profile provided by a simple lens.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules