USGB diodes are in...

[MechEng3]

Thanks Andy for getting this under way and almost over !!
Below is a copy of the updated post.....amended showing balances to priority mail flat rate fee of 4.95 only.

There members that are under/over funded for getting the diodes to here and flat rate shiping to them. Mophead has been generous with his overpayment and willing to share....provided he only wants the flat rate... If a couple of others don't mind a 1 and a few cents to apply to help others it would be great... USPS Priority mail shipping at 4.95 flat rate box ...This will enable others with small shortages to get under way with flat rate postage..... if he/others wants insurance and delivery confirmation this will reflect in an additional cost. Please PM me with your addy to mail this stuff to....I have boxes on hand and will get it out ASAP...expected icing conditions today and for next week... DrLava if you could send me a 10 spot I will go and mail yours as well......other than that, if the above applies and simple flat rate USPS Priority boxing is good, the diodes will be packaged up and go out. Please let me know your thoughts...... BTW......insurance from USPS website up to $100 coverage is 2.25 and delivery conf. is average of .75....





Andy has informed he thinks that the order has been filled and shipped from the vendor.
The shipping from Andy to the US has cost $76.37 insured Airsure.

I have calculated the overseas shipping to a weight based fee.
So I have set out as Andy and calculated 50g for the BR diodes{no matter how many were ordered} and 50g for each 815 sled for each member.
Our parcel is $76.37 for a 3050g parcel. This comes down to $1.25 per/ 50 gr.

Paypal fees shared by all involved to send funds to vendor is $4.54 each member
Paypal fees to send funds to Andy from me $20.78 or $2.30 each member

So a total of $6.84 each member is shared for total shipping and fees to get the parcel into the US minus the weight based fee from above.


SF-AW210 Blu-ray diode USD25 each
not 100% sure of this diodes power due to recent issues with them but somewhere around 150mw.

GGW-20L: USD45 each
never tested one of these but everyone says 200-250mw each

PHR-803T: USD5.5 each
max power of 100mw

LPC815: USD5
comes as a full sled, so you get a coated mirror for the diode. this is an open can red diode which is good for 250mw in a heat sink.

funds rcd. total with fees
Mecheng3 > Paid 125 1100g 144.34
LPC-815 -22 pcs

Mophead > Paid 135 250g 123.09 11.31 over
GGW-20L -2pcs
LPC-815 -4pcs

Gogu >Paid 76.58 550g 81.57 2.00 over
PC815 - 10pcs
PHR-803T - 2pcs

Mixedgas > Paid 27.56 50g 30.09 2.77 over
PHR-803T - 4pcs

Elektrofreak > Paid 33.20 150g 31.59 1.61 over
PHR-803T - 2pcs
LPC-815 - 2pcs

HaloBlu > Paid 37.60 150g 31.59 6.01 over
PHR-803T 2pcs
LPC-815 2pcs

Sugeek > Paid 35.00 150g 31.59 3.41 over
LPC-815 2pcs
PHR-803T 2pcs

UandMe2 > Paid 58.45 150g 56.59 1.86 over
SF-AW210 1pc
PHR-803T 2pcs
LPC-815 2pcs

DrLava > Paid 62.61 500g 69.34 under 6.73 and 4.95 for flat rate shipment ... shoot me a ten and they will go out....
LPC-815 10 pcs

I have eaten some of the shipping and no charge for time involved. I think we have saved a small amount but shipping killed the joy. Lets get something built...already started machining parts ....

[andy_con]

Andy has informed he thinks that the order has been filled and shipped from the vendor.
The shipping from Andy to the US has cost $76.37 insured Airsure.

the shipping cost andy £76.37

[ElektroFreak]

Thanks for the update!! It seems I'm $1.61 over.. I know it's not much, but go ahead and keep it. Thanks for putting this together!

[MechEng3]

Sugeek and Mophead's diodes shipped today....you guys need to pm me with an addy to send this stuff to before it gets installed into something...just kidding. I would like to wrap this up though....

[mophead]

Thank you kind sir. mmmmmmmm new toys.


EDIT: Got mine today. Thanks, I appreciate it.

[mixedgas]

Sent you the offset for customs and postage, plus a little for your gas.

Steve

[sugeek]

I got my package today, thank you again Mike for doing this!

-Adam

[MechEng3]

Good they have made it to their home. Mixedgas has also been sent his parcel. Are there any others that would like what they have here? If so PM me where to send it to and it will be off. If you don't want the items you ordered... I guess I could pay you back for them. Lets get this closed up.

[ElektroFreak]

I PMed you my address on Tues I think.. did you get it?

[HaloBlu]

Sorry I've been & still am out of town for a couple weeks. I'll PM the addy to my buddy over here you could mail it to.