scan pro 20 problems

[oliverst14@hotmail.com]

iv got 2 sets of scan pro 20s, unfortunatly the ilda out connector is faulty (i know i should have 2 but iv misplaced one of them) i can send a signal to the each of the scanners seperatly but when i bridge between them it doesnt send the signal to the second unit. all the wires are ok so it must be the ilda connector. now i know i can rewire the 2 projectors which i do wanna do but i have a laser show on friday night and im really not gonna have time to do this before then.

im wondering if anyone has a spare scan pro 20 ilda connector to make my life alot easier. if not i know i will have to find time to rewire and i dont really wanna do that.

any advice on repairing the one i have or any other way of doing what i want to will be great also

thanks ollie

ps. sorry iv not been on here for a while (not that anyone will really notice lol) im now trying my best to get a laser lighting and sound company setup cause iv been having alot of problems with my job. iv basically had enough of doing something for a bunch of ungrateful people that i dont enjoy. i did a small laser show in manchester using 6 lasers and 3 pangolin flashback 3s and it really gave me a huge boost to go for it.

ill be back on with pics of fridays laser show time allows

[Doc]

Do they have DMX boards Dan?

The reason I ask is that some DMX boards use the interlock pins to enable/disable operation, so if the interlock is open circuit on scan set 2 it will be in DMX mode.

Just a thought.

Ian

[gottaluvlasers]

Oli-

i have some spare scan pro parts laying around. let me know if you need/want anything. I am still waiting for the school adress also my friend!!!

-Marc

[oliverst14@hotmail.com]

hiya marc

i emailed it you pal. ill resend if you need me to but i emailed it that day u were going out and u sed send it to u.



oli