Got 1064?

[mixedgas]

I need 10-15 mW of 1064 dpss. No, not leakage from a green, just a small 1064. Can go as low as 5 mW.
Maybe a little higher. Will be used to make measurements of yag laser cavities.

Steve

[daedal]

I need 10-15 mW of 1064 dpss. No, not leakage from a green, just a small 1064. Can go as low as 5 mW.
Maybe a little higher. Will be used to make measurements of yag laser cavities.

Steve

Idea:
Get one of cheap 532 pointers/modules and take out the KTP and the IR filter and you got 1064

Granted, it might still leak some 808... but if that's not a problem, then any pointer from www.dealextreme.com would work

--DDL

[mixedgas]

Idea:
Get one of cheap 532 pointers/modules and take out the KTP and the IR filter and you got 1064

Granted, it might still leak some 808... but if that's not a problem, then any pointer from www.dealextreme.com would work

--DDL

If I order a laser from Dealextreme the universe will collapse inwards on itself.

Steve

[MarioMaster]

I have a q-switched 1064 system (guts from a laser-export 355nm laser) but it's probably way too much power for what you want

[krazer]

I should chime in--said 1064nm module out of the laser export will run CW just fine, I measured it doing a few hundred mw (can't remember how much exactly off the top of my head). Just apply power to the diodes/tec, leave the q-switch disconnected and it will lase CW quite happily.

[142laser]

Hi Steve,
Sam and I have a Lightwave 120 SLM 1064 nm laser rated 4 mW and making 4.4 mW SLM tunable ocer the Nd:YAG gain curve. We are asking $2K but for you we would take $1,250. Phil