Results 1 to 4 of 4

Thread: Searching for 532nm Laser 200<mw with a head width of max 4cm.

  1. #1
    Join Date
    Apr 2008
    Location
    Netherlands
    Posts
    282

    Unhappy Searching for 532nm Laser 200<mw with a head width of max 4cm.

    I am trying to find a replacement.

    My current laser is at its end but I have trouble to find a fitting replacement.

    The head must be max 4cm in width. And output needs to be (afcourse nice beam specs and analog modulation) 200mw< 250mw<.

    I know that the CNI PGL-V-H-532 fits. But that one has got terrible analog modulation. And has a max of 150mw.

    Is there somebody that knows an alternative?

  2. #2
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,632

    Default

    I think the "MR" series Lasever heads are about 4 cm wide. You might want to look into one of those.

    True, they don't have the best reputation for reliability, but to the best of my knowledge, the problems with the TEC units going bad (causing laser power to drop off) were limited to the blue Lasevers only... And they've claimed to have fixed that problem too, so maybe they're worth a second look.

    Adam

  3. #3
    Join Date
    Jan 2007
    Location
    Cupertino, California
    Posts
    2,130

    Default

    Yeah, the blue ones had issues, I think it may have stemmed from the fact that their power supplies only drove the TECs on/off which can be damaging over long periods of time.

    The green ones don't seem to have the same problems. They are very small, and would meet your space requirements.
    CLICKY!!!

    Admin: In the immortal words of Captain Planet: YOU HAVE THE POWER
    Admin: (To quit being a bitch)

  4. #4
    Join Date
    Apr 2008
    Location
    Netherlands
    Posts
    282

    Default

    okay,

    Thnx 4 the info.

    Ill look in to that.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •