Dye Laser pumped with DPSS...

**mixedgas** · 02-24-2010, 20:39

Stokes law says output wavelength must be longer then the input wavelength unless you have non-linear optics.. So sorry, no blue,

but just about anything redder then 532...

Steve

**prodjallen** · 02-24-2010, 21:00

Well if thats the law, couldn't you possibly use 2 dye systems back to back if you had 532 to start with? Pump (532nm) > Dye Red (630-650nm) > Dye Blue (440-460nm) ? I know it wouldn't be any efficient at all, but would it work is the question?

**Laserman532** · 02-24-2010, 21:04

Originally Posted by prodjallen

well if thats the law, couldn't you possibly use 2 dye systems back to back if you had 532 to start with? Pump (532nm) > dye red (630-650nm) > dye blue (440-460nm) ? I know it wouldn't be any efficient at all, but would it work is the question?

lol fail!!!!! Fail!!!!fail!!!

EDIT _PRODJALLEN YOU NEED TO GO BACK TO YOUR NONSENSE THREAD AND POST THERE..HAHA

**dream beamz** · 02-24-2010, 22:03

Originally Posted by prodjallen

Well if thats the law, couldn't you possibly use 2 dye systems back to back if you had 532 to start with? Pump (532nm) > Dye Red (630-650nm) > Dye Blue (440-460nm) ? I know it wouldn't be any efficient at all, but would it work is the question?

wow, i havent been keeping up with the laserscope thread but jeez man. You really shouldnt own such a dangerous piece of equipment.

**aijii** · 02-26-2010, 01:15

otherwise try a blue PAR56 gel in front of the dye laser. that should make purple - red mixed with blue

...

ahem.

**dave** · 02-26-2010, 04:09

I hear if you drink the dye, you might just see everything go blue??!!!!

**Laser Zone** · 02-26-2010, 18:05

Oh Allen Why ?? You should drop your current classes , and take up some classes that are more towards lasers and physics .

**Laser Zone** · 02-26-2010, 18:19

Ive learned with lasers that , if it looks like it might work , It wont !!!!! And if it looks like its working that way , its not !!! You'll learn Allen , you"ll learn. maybe ...

**Laser Ben** · 02-26-2010, 18:23

Originally Posted by Laser Zone

Ive learned with lasers that , if it looks like it might work , It wont !!!!! And if it looks like its working that way , its not !!!

Can you please keep all of this bullshit out of here. Yes, allen is a fucking moron, we have established that. Stop ruining threads by taunting him, you are just as bad as he is.

**Laser Ben** · 02-26-2010, 23:19

And... Moving on from that shit...

I went to do a full alignment and found that my LBO crystal is totally shot, there is almost a hole burnt throuh the whole thing, looks like the ends got contaminated, then the laser kept burning through the crystal. Additionally, the unit looks like the unit sheared off the 2-56 screw with the cracking/heat of the unit. I think it can either be repaired or replaced.

Thread: Dye Laser pumped with DPSS...

Thread Tools

Posting Permissions