Page 18 of 27 FirstFirst ... 8141516171819202122 ... LastLast
Results 171 to 180 of 267

Thread: Groupbuy?

  1. #171
    Join Date
    Jul 2008
    Location
    Desenzano (BS) - ITALY
    Posts
    250

    Default

    i confirm my interest... 2pcs
    Lorenzo from Italy
    www.LF-entertainment.it

  2. #172
    Join Date
    Apr 2008
    Location
    Amsterdam, NL
    Posts
    2,098

    Default

    The AC board will have 1 continuous on output and 3x switched output switched by a 8A solid state relais and protected with a fuse.

    Features of the ILDA breakoutboard:

    Buffered differential RGB signals
    EN60825 compliant interlock with surge protectec optocoupler inputs
    + - 24V in and eay wiring to scanners
    Power out for scanfail
    feedback signal out to scanfail
    Collor output to scanfail, and optional potentiometers for color adjustments
    Build in PSU for buffer circuit
    5V 10A switch off for laser drivers drivers.
    Option for separate interlock cable or interlock over the ILDA
    12V pass trough for viasho lasers
    Option to swtich on mains PSU (for galvos) when emergency button is released, after that you can "start" the laser drivers with start button

    And I most probably missed some options

    the board will be 80x100mm (same size and mounting holes as a visaho driver, so it will fit on top of a viasho driver if you have the space.

    Next week the first prototype board will arive and if everything is ok, i'm ready to make more.
    Attached Thumbnails Attached Thumbnails interlocksch dif&#1.JPG  


  3. #173
    Join Date
    Feb 2010
    Location
    NJ
    Posts
    270

    Default

    put me down for one, if I haven't already asked. I might take two. What is the cost?

    Thanks!

  4. #174
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,580

    Default

    Yoehoe!!!!! The plates are cut so i can pick them up Monday. If MCcarrot has his board ready i can ship al the parts at once for you guys. Synce has a plain so he can have is has first. I want to see the plates in personal because this is the first batch. I want to check everything twice before it goes to the anodisizer.
    I,m going to try to ship everything as fast as possible but i think its important that the quality comes first.

  5. #175
    Join Date
    Jul 2008
    Location
    Desenzano (BS) - ITALY
    Posts
    250

    Default

    nice johan! i sent you a PM so we can talk about galvos too
    Lorenzo from Italy
    www.LF-entertainment.it

  6. #176
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,580

    Default

    pm send to you lorenzo Also some more pics. Dont look at the alligment of the dichro,s. Its was made between adjusting.
    Attached Thumbnails Attached Thumbnails P1080443..JPG  

    P1080448..JPG  

    Last edited by edison; 04-09-2010 at 10:54.

  7. #177
    Join Date
    Feb 2010
    Location
    NJ
    Posts
    270

    Default

    Quote Originally Posted by edison View Post
    Yoehoe!!!!! The plates are cut so i can pick them up Monday. If MCcarrot has his board ready i can ship al the parts at once for you guys. Synce has a plain so he can have is has first. I want to see the plates in personal because this is the first batch. I want to check everything twice before it goes to the anodisizer.
    I,m going to try to ship everything as fast as possible but i think its important that the quality comes first.
    That is great news!

  8. #178
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    @mccarrot - are you going to post a more general group buy thread about your boards? I think there are probably a good number of people who are not following this thread that will be interested (myself included, funds permitting!)

  9. #179
    Join Date
    Apr 2008
    Location
    Amsterdam, NL
    Posts
    2,098

    Default

    Quote Originally Posted by norty303 View Post
    @mccarrot - are you going to post a more general group buy thread about your boards? I think there are probably a good number of people who are not following this thread that will be interested (myself included, funds permitting!)
    The professional PCB prototype is now being made, next week I will assemble the prototype and when everything is ok I will make a groupbuy to see how many PCB's I need to order.

    I most probably sell them as a kit or better as bare PCB as I have to little time to solder them together.

    For the people in this group buy you can order the board by Edison.

    Estimated costs of the bare board will be around 35 euro.

  10. #180
    Join Date
    Jan 2010
    Location
    Stede Broec - the Netherlands
    Posts
    136

    Default

    No prob....

    Do call me btw :P

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •