Groupbuy?

[specialbart]

I have also send my money today

[edison]

Hi guys here is the payment update:

tocket: full amount recieved
synce: full amount recieved
ledpaint: full amount recieved
Photon-foundry : full amount recieved
Specialbart : tranferred
Satje : payment tommorow
blowfly : full amount recieved.

[edison]

Everyone has payed the full amount and satje told me that he will transfer it today.

To keep everyone excited about the case within a couple of days i will post some pictures of the Ildaloopboard connected to my board to give you guys an idea how easy it gets to wire your projector.
I spoke with Mccarrot and we are going to make a small modifiction to the safetyboard to finalize it.
I have an extra board that we will modify and then the boards are sold true MCcarrots website because the schematic is his design. I think that fair.

As you may have seen i have 4 powersupplies in my projector. The reason for this is only because i have two viasho,s that needs also 12v. So if you have lasers from CNI, KVant, Laserwave then you only need 1 heavy 5v powersupply and 24+- to power your scanner amps. I use two 24v traco,s for this but you can also use the one that comes with your scanneramps. I used the traco,s to save room and it looks nicer. Just a matter of taste nothing else.

[satje]

Payment done....

I just sit back and wait, no hurry here.
Rather get a fancy case

Cheers,
Ferry

[edison]

Why i dont use the powersupply that comes with the scanners

One is reason that i use traco,s. the efficiency is 92% so not much energy is lost and so low on heat development. Also all scanner companies use 24v+ -
and most laser manufacturers use 5v to power their lasers. So once you build your quality case with a heavy 5v powersupply and two good quality +- 24v traco,s your done for the future
If you swap your lasers in the future for more powerfull ones you have plenty of juice. The same with your scanners. If you have a powersupply that comes with your first set of scanners and you want to swap them let say for another brand its possible that you don,t have enough amps to power them or the powersupply that comes with the new ones won,t fit. Lasermodules and drivers getting smaller in the future so i can,t think on any reason why they shouldn,t fit.
So in my opinion build something that is flexible for changes in the future. If you want the traco,s i can deliver them but their 10 euro p/s more then when you order them yourself. Price: 64 euro for ps I try to offer as much support as i can so to do that 24/7. it would be great if people are willing to fund this a little bit. I will deliver also the plastic pins at no cost to mount them on the baseplate to make it easier.

If anyone wants to have the traco,s also for powering your lasers and scanners or only the lasers or only the ones for powering your scanners shoot me a pm and i will ship them together with your case.


I just had the struthprofile company at the phone and these will be ready this friday

[satje]

I want to build me a flightcase for this projector.
Maybe it is interesting to start a groupbuy for it?

If there is any interest in this, i will look into it.

The flightcases will be custom made by me for this projector with 9mm HPL coated wood, foam inside for a snugg fit.

Also you can choose between a version with a hinged top or fully removable.

Can send it as a DIY kit or build it for you....
Let me know if there's some kind of interest in this.

Ferry

[specialbart]

if you have any picture?

greetz

[satje]

No picture yet, i first will build me myselfe one to get the dimmensions and price right.
When done i wil follow up on this.

The flightcase will be professional with options to choose from (hinges, amount of handles and butterfly locks as wel the thickness of the foam)

Will keep you guy's posted.

Ferry

[edison]

I will measure the case incl bracket as soon as i finished my fresh air walk

[Synce]

I want to build me a flightcase for this projector.
Maybe it is interesting to start a groupbuy for it?

If there is any interest in this, i will look into it.

The flightcases will be custom made by me for this projector with 9mm HPL coated wood, foam inside for a snugg fit.

Also you can choose between a version with a hinged top or fully removable.

Can send it as a DIY kit or build it for you....
Let me know if there's some kind of interest in this.

Ferry

I could possibly be interested after I financially recover from sending all my money to Edison (case, psu's, ilda boards, etc etc etc etc)