Absolutely, although I'm not sure from previous posts by Bill on the subject that the intention is to provide fully featured alternative to a dedicated DMX desk, or rather provide some DMX control for things like foggers, effects wheels, etcsupports DMX!
I'd guess you want the facility to record DMX to specific cues alongside existing frame selection/manipulation to make it a fully integrated solution for what smoke&mirrors looking to achieve.
Otherwise you're still having to select a cue, then a specific DMX element separately elsewhere in the application, which might as well just be done via a separate dedicated DMX application (imo)
For waht its worth I used to run LivePro and Chamsys MagicQ on the same laptop, with MagicQ on extended desktop on a touchscreen and this worked fairly well. Only thing I didn't like was the lack of redundancy.
I now have a dedicated laptop for Pango, and a dedicated PC for lighting, with the facility to run both apps from either PC in case of a failure. Just a case of maintaining same software builds/showfiles/workspaces across both machines, but I have a full copy of everything (drivers, software, installed folders, config, etc) on a USB key, so as long as I can find a spare PC, I can be up and running in about 5 mins.
OK let me approach this from another angle: Medialas Mamba 2 vs Quickshow for live displays. Anyone have any experience of that?
The "Live" interface on Mamba looks clunky and broken to me, and I'm not even sure you can control DMX from it? But if one can, I'd be seriously tempted to drop Pangolin cos they ain't been so helpful - largely dismissive, abrupt answers. Strange they don't want my money, but hey, it takes all sorts.
Guys, suggesting to me to house an FB3-SE myself may seem trivial job to you, but to me I'd be taking a soldering iron to £500 without really knowing what I was doing - and that's presuming I can find a suitable box with slots for DMX in, DMX thru, the ILDA out, USB, power supply, and an access slot for the SD card. (One OEM charged 1800 Euros for such a box, more than my budget and then some). What's more, I couldn't find the posts referred to above with connection pictures, so I am getting a bit frustrated with all this now.
I think you're making out the SE to be something it isn't, particularly based on your Pango forum post.
To be aware of why the SE comes bare boones requires knowing how it came about in the first place - basically as an OEM part for manufacturers to build into their own products. They have done a cased one, but without the DMX board as it wasn't considered a major requirement for people wanting an external controller (look at other DMX board solutions, they're all internal)
As for the mounting it yourself, I think you're over egging the pudding somewhat.
I don't think I had to do any soldering on mine, and the enclosure I used was a £4 one from Maplins. I used small drills and files to cut the slots, and regular brass standoffs to mount it.
As the barebones board was also sold to hobbiests as the LA Freak package, I don't see why Pangolin are out of order telling you you can simply mount it yourself. They are simply explaining how you can achieve what you want. Sure, you're frustrated at not being able to buy precisely the product you want, but they have provided you with enough info to move forward.
You seem to be wanting them to turn around and say they'll custom build you one. If that is the case, then simply ask someone on the forum to do it for you, it'll be far cheaper than paying Pangolin, however I still don't see a reason why you couldn't do it yourself. I did, and I'm far from an engineering genius.
Well that's something at least. I still find it scary, in the sense that if I make a mistake then bang goes my money with no warranty or anything. No fricking WAY am I prepared to spend £X00 without some sort of warranty. Mamba seems a better deal in that regard.
I don't think they're "out of order". They are simply scaring me away to a competitor, and they don't care (William said as much). In fact they are so confident their product is the best that they seem utterly blind to the fact that they're making me jump through hoops to get it.
And I am simply explaining that as a customer who likes lasers and lighting but isn't keen on electronic engineering and invalid warranties that I find their products fall short of my - probably not uncommon - requirements. Christ, if the FB3-XE had the DMX board in it I'd have bought it by now! But they have compromised their product by design, IMHO.
For sure!
Move forward, perhaps. Get to where I want? - no way!
Would have been nice, I guess. Or perhaps they could have pointed me at someone who could. Or simply listened and said "that's interesting, we will take that on board as our customers' needs are important to us".
Well I did wonder if someone might offer their servicesNo volunteers so far, though.
What's that old saying about not asking and not getting?
if you filled out your profile so it showed where you are, AND asked specifically, then you might find someone willing to do it for you.
By the way, have you sen this...
http://www.photonlexicon.com/forums/...stuff-for-sale
Already cutout, ready for mounting.
SO: is there someone out there who could help me create a box for an FB3-SE that has
o A slot for the SD card
o A 5V PSU (internal or external)
o ILDA out connector
o DMX in
o DMX thru
o USB in
Obviously I'd show my appreciation for time/parts/labour in some way. PM me if you can help.
If you don't get any replies, send a PM to Rob (Stanwax) and see if he's got the time. You will be very pleased with the results, trust me.
If no one else replies and Rob is too busy, then send a PM to Francesco Loon (Francesco) and see if he can assist you. True, he's in the Netherlands, but he's also an authorized Pangolin dealer (not to mention a great guy) and thus he's got everything he needs to help you out.
And finally, if you want to do live shows, seriously consider getting a license for Live Pro. It's the cat's meow when it comes to live laser show performances. Well worth the price!
Adam