heres a question - if small 150mw 532nm modules can be made -
http://lasershowparts.com/store/inde...&productId=222
why cant small 473nm modules be made? is it just down the amount of pump power needed and the size of the pump to do that?
heres a question - if small 150mw 532nm modules can be made -
http://lasershowparts.com/store/inde...&productId=222
why cant small 473nm modules be made? is it just down the amount of pump power needed and the size of the pump to do that?
Eat Sleep Lase Repeat
They are, ala the 473 pointer. They can't be very stable though, with 3% conversion efficency = heat + no room for tecs.
Doc's website
The Health and Safety Act 1971
Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.
but 473 pointers are only 5-10mw
with that green you have to add your own tec, which is what i would want to do with a blue.
Eat Sleep Lase Repeat
If it were 457nm DPSS it would be easy to produce small pointer-size modules like 532nm. 473nm DPSS is very inefficient in the first place, typically 5-10% AT BEST, which meaqns the crystals need to be pumped hard. That creates a lot of heat from the diode, and pointer modules can't deal with it properly. Also, since the doubling crystal used to get 473nm is extremely temperature sensitive (needs to be kept within .1C to be stable) this heat further degrades performance. There's no way you'll ever see that kind of power from a passively cooled 473nm system.
i hear what your saying there. but what im saying is why couldnt one be made like the green in that link then we could add our own tec setup and make our own 473 modues.
now i know 473 is very inefficient but i would be happen even if it were only 50mw. 50mw of 473 beats 300mw of 405nm any day. but at the moment 405 beats 473 on size.
just a thought anyway
Eat Sleep Lase Repeat
CNI makes "OEM" versions of their 473nm line without TECs so you can add your own.. They're not as tiny as those 12mm modules, but they're basically everything else you're describing: http://cnilaser.com/OEM%20laser.htm
cool will take a look
Eat Sleep Lase Repeat
I was thinking about the same thing today when I was looking at tec specs for my eco-fan.
6x6mm tecs would be sweet if you want to use regular diode housings like Aixiz and the likes...
Also, of course, very handy when building your own cooling systems overall ^^
http://www.elfaelektroonika.ee/cgi-b...663-18&lng=eng
can you, cool.
shame you cant just buy the laser part
Eat Sleep Lase Repeat