Results 1 to 5 of 5

Thread: can It be True

  1. #1
    Join Date
    Jul 2009
    Location
    Denmark
    Posts
    20

    Question can It be True

    Hey !

    i was on youtube, when i found this link : http://laserdiy.com/bluemodule405nm.aspx

    Can that be true, that you can get a 150mW 405nm laser diode for 60us $ ?? i know of course it is just the Laserdiode, there a ofcourse no supply and modulator, but stil ??

  2. #2
    Join Date
    Feb 2010
    Location
    Sweden
    Posts
    110

    Default

    I think the
    350mW -400mW Blue Laser Diode

    for 74.99$ sounds even more amazing

  3. #3
    Join Date
    Dec 2008
    Location
    Vezon, Belgium
    Posts
    1,017

    Default

    found the same on ebay for $27 yesterday... don't know if it's a genuine hi-potency diode, but still...

  4. #4

    Default

    Quote Originally Posted by laserdiy.com
    Cw power measured directly from diode at 180 mA = 350 mW
    IMO it's not possible even for much more than $60. From BluRay destined diodes I would rather expect something like 200mW at this current, and if that diode from the link is rated for higher power than BluRay diodes then threshold current should be higher too and thus power @180mA should be even lower than in case of BluRay I think.
    http://c4r0.byethost9.com/ - If you like lasers, high voltage, x-rays and stuff like that, check out my website

  5. #5
    Join Date
    May 2008
    Location
    Wisconsin
    Posts
    449

    Default

    All the diodes I've seen rated at 150mW were actually PHR diodes that only do 100mw or so for anything resembling a long life. But yeah, violet diodes are quite cheap now. LPF regularly sells 100mW diodes for under $10. I haven't looked at the higher power pricing lately.

    focuses the beam more tightly than any other module on the market. This allows for burning and engraving at much longer distances
    hmm... somethin' wrong here.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •