Results 1 to 9 of 9

Thread: scanning, leds, and optics

  1. #1
    Join Date
    Dec 2009
    Location
    MI, flint, farmington hills
    Posts
    569

    Default scanning, leds, and optics

    Thanks for the info i have solved most if not all of my problems.

    I am left with one how ever.
    I am unable to make a correction amp. The only schematic i have is confusing i had some help but even with that i hit a dead end.
    Audio_coupler..png
    The bottom left is where i am having my problems.
    those symbols is for batteries. however i think it should be from the galvos power supply.
    Last edited by kiyoukan; 03-29-2010 at 22:55.

  2. #2
    Join Date
    Dec 2009
    Location
    MI, flint, farmington hills
    Posts
    569

    Default condensed post

    initial post was to information heavy for my main problem condensed and re asked.

  3. #3
    Join Date
    Jun 2009
    Location
    St. Louis, MO
    Posts
    1,299

    Default

    I think I understand what you want, and you're going to run smack into optical limits. The thing that makes lasers so cool is you can focus their beam down to practically nothing, and you just can't do that with a conventional (i.e. extended) light source...

  4. #4
    Join Date
    Dec 2009
    Location
    MI, flint, farmington hills
    Posts
    569

    Default hm

    Well that 6mm focuser is built for leds
    so i know you can get them down to that point.
    I have gotten a led spot down to 6inches from 12 feet. i am only trying to get it down to 1-2.5in spot.
    that was with a 4in double convex lens from my helping hands.
    i know it can be done a few years back when i was knight diving i was given a high powered led light that could do almost what i wanted it, but it had a 3' spot.
    Last edited by kiyoukan; 03-22-2010 at 18:01.

  5. #5
    Join Date
    Jun 2009
    Location
    St. Louis, MO
    Posts
    1,299

    Default

    Quote Originally Posted by kiyoukan View Post
    Well that 6mm focuser is built for leds
    so i know you can get them down to that point.
    I have gotten a led spot down to 6inches from 12 feet. i am only trying to get it down to 1-2.5in spot.
    that was with a 4in double convex lens from my helping hands.
    i know it can be done a few years back when i was knight diving i was given a high powered led light that could do almost what i wanted it, but it had a 3' spot.
    Let me see if I understand - you were Knight (sp) diving and a led flashlight could almost do what you want - so therefore - what you want is something you can accomplish with no understanding of optics – utilizing random lenses you can find at some surplus shop down the street… Is that close?

    Just for kicks - ask yourself, why on a website populated by really helpful people - nobody else answered your question - then - ask yourself why those same helpful people didn't spring up and say I was misleading you...

  6. #6
    Join Date
    Dec 2009
    Location
    MI, flint, farmington hills
    Posts
    569

    Default

    for the moment yes i am playing with the few lenses i have but. if some one here has the knowledge i am willing to spend money, however i do not want to go to Edmund optics and buy $$$ in lenses just to find out what 1 or 2 i need and be left with 20 or so lenses that are now useless or i have to go and put them all up on eBay.
    I have a very limited understanding yes.
    I understand there are limits to what can be achieve when focusing light.
    But i do not think this is pushing those limits a led with the right lenses should be able to get a dot from 12ft away around 2.5in solid with 1-1.5in of splash.
    That seems rather achievable.

  7. #7
    Join Date
    Dec 2006
    Location
    denver,co
    Posts
    1,078

    Default

    I have played with this.
    I knew going in that I couldn't solve the optical invariability problem but wanted to play with some really high power diodes.

    There is a ratio of: power, spot size, collimation, physical size. Not to mention entendue.

    The size and collimation of your projected spot is directly related to to your emission (point) source. 1mm led die can't be collimated and small at the same time. Pick one, just the way the physics work.

    That is the reason that they use ~25 um for fiber remote heads and take the loss. If you could use 500um AND get a small beam with more power they would.

    chad


    When the going gets weird, the weird turn pro.


  8. #8
    Join Date
    Dec 2006
    Location
    denver,co
    Posts
    1,078

    Default

    On a side note. Look at these. Emulators.
    http://www.youtube.com/watch?v=kYYBIxu03HA


    They used a 150 watt xenon short arc lamp. pinhole condenser and some open loop galvos with BIG mirrors ~1.25" . And they were pretty dim.

    chad


    When the going gets weird, the weird turn pro.


  9. #9
    Join Date
    Dec 2009
    Location
    MI, flint, farmington hills
    Posts
    569

    Default

    so with the led i have so far what do you think the smallest spot i can get at 12"?
    The spot does not have to be perfectly sharp. i can have a bit of bleeding.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •