Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 44

Thread: CNI baby OEM modules

  1. #21
    Join Date
    Feb 2010
    Location
    Sweden
    Posts
    110

    Default

    Damnit! My only breadboard measures 610x400x20mm so I guess I'm out

  2. #22
    Join Date
    Feb 2007
    Location
    Herts, UK
    Posts
    1,254

    Default

    Quote Originally Posted by Occularis View Post
    Damnit! My only breadboard measures 610x400x20mm so I guess I'm out
    Someone on here does a nice dual setup you can just about fit on that

  3. #23
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    Quote Originally Posted by krazer View Post
    I might be able to enter, but it would be for the laser only, it would ultimately be paired with some homebrew galvos my friend is working on.

    In any case, my current best is this little guy:
    Attachment 15467Attachment 15468Attachment 15466
    The main project was the laser head, the projector was done just as an afterthought for a school project, with some $5 galvos and a microprocessor to feed them random data.

    It measures 50x50x25mm (excluding the mounting feet which would expand it another 25mm), and is loaded with
    red - SLD1238JL - 100mw
    violet - PHR-803T - 100mw
    green - Ledshopppe 50mw pointer - 60mw

    So it does just about 250mw, but I used the cheapest diodes I could get my hands on. I am considering making one with dual diodes, although if I can't make the PBS cubes out of my sleds work acceptably well I may skip it and stick with the simple system.

    The main issue I have is the green, I still need to try and characterize the ledshoppe modules, but as it was there was terrible jellybeaning going on, and the power was super unstable. With a tec I could at least get the power stable, but I am not sure that there is much I can do about the jellybeaning.

    Has anyone done a comprehensive review of the CNI 12mm green modules? I am tempted to buy one to compare to the ledshoppe ones, but for almost $200 for a 50mw its pretty pricy (so far total cost of the project has been only slightly more than that). On that note, what is considered 'acceptable' in an application like this? Is a rise time of a ms just something you live with with DPSS?
    very nice build, any inside pics?



    Someone on here does a nice dual setup you can just about fit on that

    hahahaha fantastic
    Eat Sleep Lase Repeat

  4. #24
    Join Date
    Oct 2009
    Location
    Eindhoven, The Netherlands
    Posts
    921

    Default

    Quote Originally Posted by p1t8ull View Post
    Someone on here does a nice dual setup you can just about fit on that
    A dual Laserscope?

    Turning one of those on its side to feed it through a PBS. Now THERE's a challenge.

  5. #25
    Join Date
    Oct 2005
    Location
    Melbourne, Australia
    Posts
    678

    Default

    hmm nah, you could probably use one of the attentuating polarizing filters you rip off the laserscope when you mod it to rotate the polarisation.

    hmm now thats an idea. Anybody got a PBS cube that can handle 100W of green ?
    Now proudly stocking and offering the best deals on laser-wave

    www.lasershowparts.com
    http://stores.ebay.com.au/Lasershow-Parts

  6. #26
    Join Date
    Feb 2010
    Location
    Sweden
    Posts
    110

    Default

    Quote Originally Posted by aijii View Post
    hmm now thats an idea. Anybody got a PBS cube that can handle 100W of green ?

    tec-sandwich!

  7. #27
    Join Date
    May 2009
    Location
    UCSB
    Posts
    715

    Default

    Quote Originally Posted by andy_con View Post
    very nice build, any inside pics?
    There is a few up at my website, and some pretty drawings up here.

    But since you asked, I am releasing some never before top secret footage of my alignment process

    Step 1 - Glue down blue module
    blue..JPG

    Step 2 - Glue in the blue mirror
    blue_mirror..JPG

    Step 3 - Green
    green_mirror..JPG

    Step 4 - Red
    red..JPG

    Step 5 -

  8. #28
    Join Date
    Dec 2009
    Location
    London UK
    Posts
    224

    Default

    And if keeping that in alignment is not going to be impossible....i'll eat my hat!

  9. #29
    Join Date
    May 2009
    Location
    UCSB
    Posts
    715

    Default

    Obviously once its aligned you can't do anything to tweak it, but with good UV cure glue I have had decent luck (that particular module is about 6 months old and the alignment is still reasonable, but not quite good enough to call it a success). If I get around to making another the diodes will be mounted with a real mount and bolted down, I had a really hard time getting good bond with UV cure glue to them (I soldered a copper plate to the bottom, and glued that down, but I was not using heat + uv cure glue, so I couldn't cure the glue under the plate). Also, I think I am going to ditch the glass block and switch to some metal mounts that I can bolt in and then just use the UV cure for the final fine alignment.


    If that doesn't get things stable enough I might have to switch to using solder, but then I have a whole new set of issues to solve

  10. #30
    Join Date
    Dec 2006
    Location
    denver,co
    Posts
    1,078

    Default

    What UV cure glue were you using?

    chad


    When the going gets weird, the weird turn pro.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •