-
may as well be my stupid question thread now
been doing my research, got the 2007 revision for variance filled out, my projector should be assembled by the time we get it back. applied for slightly higher power than i expect to actually be running by then , but just how else would yer propose plans for a constantly evolving beast?
edit:
ok so i have edited once already as my reading was very productive tonight, witch leads me to better questions, its prolly a good time also to share wot i have to work with at this point: i have a red dpss(?) the beam looks like a tem 30 on the transverse mode chart i found, and another red diode slightly higher wavelength but in a tiny housing and 2 adjustable lens that im guessing are the collimator. after removing the first of the 2 lenses the beam went from nice-n-round to a narrow stripe(found a thread here describing this very thing saying these r bad)beside the fact that the diode seemed to strobe at @40-60 hz and i believe i killed it trying to push the wrong voltage and current through it trying to figure why it was flashing so.(strobing still- so it was not the power and likely crap to start with) but i believe the driver/power supply looks like its all on 1 board and is potentially still useful(can post pix as soon as i learn how).now the dpss(allegedly, i havent taken it apart yet, but ist packaged like the dpss green yag)as i said resembles the traverse mode diagram labeled TEM 30 can this be made nice-n-round like the other with those 2 lenses? and when folks speak of a multimode laser do you mean it can go back and forth between TEM 10, TEM 33, TEM 31 etc. or is it referring to anything other than a single spot TEM 00?
now we also have an argon ion tube putting out @.25 watt(when we replace the power supply, will ask for leads at another time)but im not sure we can incorporate this into an rgb as the "blanking" method would be drastically different?
i have also just purchased an external usb soundcard with 6 channel out that im using to control a set of 15k scanners and blanking.(thanx 2 steve @mid-west) still using freeware, spaghetti,laserboy,lfi player. as well as all the creative tools i found here on the forum. special thanx to serge and the rest who have contributed their efforts!!!got a test pattern in spagh. but the areas where the laser is "off" seem to wander around the image??? as of this minute its still giving me fits, but im sure there is another place on the forum where i can beg for someone to walk me through that mess.
thanx so much for all the help,
stvn
Last edited by spanqee; 05-13-2010 at 04:24.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules