Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: Let there be light!

  1. #1
    Join Date
    Feb 2010
    Location
    NJ
    Posts
    270

    Default Let there be light!

    I just got my RGB modules from Marc today. Moving from a 35mw green to a 300mw (500mw according to the meter!)...WOW!!!!!!

    I almost lit a chair on fire at work! Discharging the fire suppression system in the datacenter would have gotten me one nasty write up, I bet.

  2. #2
    Join Date
    Dec 2008
    Location
    Southport, UK
    Posts
    2,746

    Default

    Let the fun commence!

    I'm glad you decided to do the right thing in the end, take your time and you will not be dissapointed
    http://img62.imageshack.us/img62/3985/laser.gif

    Doc's website

    The Health and Safety Act 1971

    Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.





  3. #3
    Join Date
    Feb 2010
    Location
    Sweden
    Posts
    110

    Default

    Nice upgrade! =)

  4. #4
    Join Date
    Feb 2010
    Location
    NJ
    Posts
    270

    Default

    All of your advice was spot-on. After lighting these babies up, I don't regret it one bit. I can't wait to do the actual build!

  5. #5
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,579

    Default

    next step the professional case

  6. #6
    Join Date
    Dec 2009
    Location
    Seattle, Wa
    Posts
    413

    Default

    Cool! Sounds like we're building projectors at the same time. Can't wait to share some pics.

    Mike

  7. #7
    Join Date
    Feb 2010
    Location
    NJ
    Posts
    270

    Default

    @edison: I'm waiting on you, brother! I know that case is going to be awesome!

    @blowfly: what are you building?

  8. #8
    Join Date
    Dec 2009
    Location
    Seattle, Wa
    Posts
    413

    Default

    Quote Originally Posted by LEDpaint View Post
    @edison: I'm waiting on you, brother! I know that case is going to be awesome!

    @blowfly: what are you building?
    Here's the stats on the projector I'm working on.

    (from Marc)
    500mw 640nm red
    500mw 537nm green
    200mw 457 blue
    DT-40 wide scanners

    Enclosure from Edison
    Soundcard dac built from one of Dr Lava's PCBs.
    GM-20 shutter from DZ

    Right now i'm building the interlock and scanfail circuit based off at atmel embedded processor. The interlock and remote are working. I'm experimenting with the voltage change detection stuff for scanfail.

    There are a few details I haven't nailed down yet which I'll figure this out once I get the case: power distribution, apperature glass, etc.

    Will definitely post some pics when i get a little further!

    Mike

  9. #9
    Join Date
    Feb 2010
    Location
    NJ
    Posts
    270

    Default

    Quote Originally Posted by blowfly View Post
    Here's the stats on the projector I'm working on.

    (from Marc)
    500mw 640nm red
    500mw 537nm green
    200mw 457 blue
    DT-40 wide scanners

    Enclosure from Edison
    Soundcard dac built from one of Dr Lava's PCBs.
    GM-20 shutter from DZ

    Right now i'm building the interlock and scanfail circuit based off at atmel embedded processor. The interlock and remote are working. I'm experimenting with the voltage change detection stuff for scanfail.

    There are a few details I haven't nailed down yet which I'll figure this out once I get the case: power distribution, apperature glass, etc.

    Will definitely post some pics when i get a little further!

    Mike
    Except for our DAC's and the power of the modules I bought, which really aren't significantly different power-wise than yours, we're practically building the same projector!

    600mw 640
    300mw 532
    250mw 473

    Your green's going to be especially hot. let me know what it really puts out after Marc benches it.

  10. #10
    Join Date
    Dec 2009
    Location
    Seattle, Wa
    Posts
    413

    Default

    Wow, lasers are bright! Some tests on continuous wave mode on a colored wall and they were all scary bright. I cut some plywood to do a test layout, but I need to wait for the safety glasses i ordered to show up before I go much further. That gives me some time to work on the interlock and safety stuff.

    Oh i mis-typed the blue wavelength, mine is 473nm too.

    Have fun,
    Mike

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •