I've had a dead SP-125 He-Ne living in my garage for the past five years, and outside on the porch for 8 years before that. The front cavity extender was taken off early on, but the head got pretty grungy. I've wanted to clean it up for a while, and this was finally the weekend. Here'e a pic of the rear end showing the state of it:
SP-125HeadDirtyRear.jpg
I removed the plasma tube and tube mounts, and took off the heat shield holding the magnets. You can see the dirt where the holes in the shield were:
SP-125HeadDirty.jpg
Here's the dirty plasma tube on the kitchen counter:
SP-125TubeDirty.jpg
Here's the tube after the RF antennas were removed and everything's been cleaned. Took me a couple of hours on Saturday night to clean it all and get it back together:
SP-125TubeClean.jpg
This morning I started on the head. Here's a pic taken after the "sewer pipe" was done and 2/3 of the heat shield. You can see the improvement!
SP-125HeadBath.jpg
And here it is after everything is back together. Although the tube is dead, it's not cracked so will look good for display. I'm missing the metal bellows for the front end, and the cover I have is gray instead of blue. I guess it'll just have to go topless!
SP-125Head.jpg



Reply With Quote
