Results 1 to 7 of 7

Thread: Identify 473 and help please

  1. #1
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default Identify 473 and help please

    I've just finished replacing a 473 with a 532 for someone and we thought we'd have a look at the 473 and see if it could be recovered in any way, and what it might be worth.

    It's TTL and as most cheapy Chinese lasers, lases without modulation input. If I short the modulation pins on the driver and then remove it, it seems to lase dimly then flickers and goes out after a second or 2. You can hear the fan sound on the driver change from the load when you unshort the pins.

    We believe it was 100mW when new.

    Here are some pics of the relevant bits...
    DSCN2955.JPG
    DSCN2953.JPG
    DSCN2954.JPG
    DSCN2952.JPG

  2. #2
    Join Date
    Jan 2007
    Location
    Sheepsville, Wales, UK
    Posts
    3,407

    Default

    Adam
    I will second what electrofreak says - its for sure a Lion. Its the same as the one I TTL to Analogue modded for Smog last year - they seem to sup a lot of current for little output and I dont know what joys (or horrors) lie beneath that cover on the head. I would have a play with the pots - you got nowt to loose I would try and work out which pot is which first - it may be tough to identify which one is the diode and which is the xtal control but if you work slowly and methodically you may get somewhere.

    Rob
    If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
    -----------------------------------------------------------------------------------------------
    Laserists do it by the nanometre.

    Stanwax Laser is a Corporate Member of Ilda

    Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
    www.photoniccleaning.co.uk

  3. #3
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    Thanks Electrofreak and Rob.
    Is there a method to working this out, or just trial and error?
    Also, has there been a thread about adjusting these things before, that I can look up, or can anyone explain what the pots 'should' do and how I should go about adjusting them?

  4. #4
    Join Date
    Jan 2007
    Location
    Sheepsville, Wales, UK
    Posts
    3,407

    Default

    As you dont know which is which or which direction is hotter and which is cooler you are gonna have to just try. See if you can identify which is the diode pot - cant remember off the top of my head then at least you know which pair you need to twiddle. I would work slowly and on one at a time see if you get any improvement and see which direction you are going. If you did pop the hood - so to speak - you may be able to work out which pot is for which tec. Stick a volt meter across the tec and with the laser blanked to no output let the voltage settle (should be quick) then turn the pot half a turn maybe and see if the volts on that tec change. At least that will give you some idea where you are stabbing in the dark

    Rob
    If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
    -----------------------------------------------------------------------------------------------
    Laserists do it by the nanometre.

    Stanwax Laser is a Corporate Member of Ilda

    Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
    www.photoniccleaning.co.uk

  5. #5
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    Thanks EF, good link. Whilst still not sure which pot is which, I've got it to some sort of base setting where it lases constantly. Even got it to show 5mW on the Laserbee II !!
    Now to start twiddling individually and see what improves/worsens. At moment, switch on is slow so I'm going to work on instant on, then work out how to up the power if i can. Middle pot seems to be TEC related as until about 6 turns clockwise it refuses to lase. At that point it comes on then goes off and dims fairly quickly. If i turn it up more it lases for longer.

  6. #6
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    Well, i did 'pop the hood' but its all encased in what looks like an acrylic block. Didn't really want to go further at this point...
    DSCN2956.JPG

    DSCN2957.JPG

  7. #7
    Join Date
    Jan 2009
    Posts
    1,622

    Default

    If you are reading this it means that this post used to contain some sort of helpful/educational information posted by me. I no longer have even the tiniest interest in contributing ANY knowledge or effort here on photonlexicon.com. Why should anyone here benefit from my hard work? It's not like there's even the tiniest bit of appreciation coming my way from those people whom I've tried to help since I've been here, both by plugging their products and by consolidating info.

    I apologize for not being able to help here anymore. If you want someone to thank for turning me against the idea of lending my hand to this particular community, thank our member dsli_jon for demonstrating quite convincingly SEVERAL times just what a smug, superior and condescending bunch of douchebags some of the so-called "professional laserists" here can be to people who think or act differently than they do. You can gold plate a piece of shit by calling it "professional", but at the end of the day it's still just a piece of shit. It only takes one worthless individual to screw up the public image of a whole group, at least in my book. "Professional" my ass.

    To any and all new members who might someday read this: NEVER let dsli_jon or any of the so-called "professionals" here talk to you in any way that you find to be rude, smug, snobbish, condescending or disrespectful because people like dsli_jon don't know how to speak any other way. The concept of "respecting others and their opinions/viewpoints" is entirely lost on him and people like him. All that matters is that they somehow have an opportunity to display their superiority complexes for all the world to see.

    The really sad part of all this: Who knows how many worthwhile future contributors and quality individuals have been run out of here by some of the absolutely ridiculous, "high-school-esque" bad attitudes that many members here like Jon have given people who might ask n00bish questions or who might bring up topics that they feel shouldn't be discussed here. To me it's very sad that people as absolutely worthless as Jon and his supporters have any sort of influence here. If you're a new member who is not prepared to bend over and take whatever these people give you, you'd better just leave now because they have zero tolerance for "thinking outside their box".
    Last edited by ElektroFreak; 08-23-2010 at 10:05.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •