Results 1 to 6 of 6

Thread: Looking for drawings of DT40 Wide galvo mount!

  1. #1
    Join Date
    Jul 2008
    Location
    Desenzano (BS) - ITALY
    Posts
    250

    Default Looking for drawings of DT40 Wide galvo mount!

    hi guys! i need the drawing of the DT40Wide galvo mount... with measures

    anyone have it?

    thank you
    Lorenzo from Italy
    www.LF-entertainment.it

  2. #2
    Join Date
    Jan 2007
    Location
    Sheepsville, Wales, UK
    Posts
    3,406

    Default

    Hello Lorenzo

    The holes in the base of the block are in a 25mm square (with ony 3 of the corners used)
    You will need to get the scanblock as close to the output apeture as possible to keep the output window size down to a sensible size, but the body of the Y galvo will restrict this to 2mm. If you therefore place the hole for the frontmost fixing 9.5 mm from the front edge of your baseplate and then work the 25mm square back from that you will be ok.
    As for CNC - by the time you have faffed around with it you could have marked, center pooped and drilled the holes!

    Rob

    EDIT: PS I am just rebuilding my website and data like this will be provided on the relevant pages very soon
    If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
    -----------------------------------------------------------------------------------------------
    Laserists do it by the nanometre.

    Stanwax Laser is a Corporate Member of Ilda

    Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
    www.photoniccleaning.co.uk

  3. #3
    Join Date
    Jul 2008
    Location
    Desenzano (BS) - ITALY
    Posts
    250

    Default

    dear rob,
    you are right... but we have 2 same projectors to build... so if we do a good job one time we will have the project for other projectors in future
    Lorenzo from Italy
    www.LF-entertainment.it

  4. #4
    Join Date
    Jul 2008
    Location
    Desenzano (BS) - ITALY
    Posts
    250

    Default

    hey Rob, how is the diameter of the hole? is it M2 or M3? i'm not @ home and i'm making measures for cad....

    thank you
    Lorenzo from Italy
    www.LF-entertainment.it

  5. #5
    Join Date
    Jan 2007
    Location
    Sheepsville, Wales, UK
    Posts
    3,406

    Default

    Lorenzo
    The block is tapped to M4 so make the holes 4.2 for clearance
    rob
    If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
    -----------------------------------------------------------------------------------------------
    Laserists do it by the nanometre.

    Stanwax Laser is a Corporate Member of Ilda

    Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
    www.photoniccleaning.co.uk

  6. #6
    Join Date
    Jul 2008
    Location
    Desenzano (BS) - ITALY
    Posts
    250

    Default

    ok thanks!
    i'm going mad with this fu****g board
    Lorenzo from Italy
    www.LF-entertainment.it

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •