Dichros - reflect 532, pass 445 ?

[dave]

More then enough room to fit a 445nm AR coated high quality collimator + mount

What is the focal length of your collimator? I suspect that using this will yield a less than satisfactory divergence..

[norty303]

@mccarrott - what size is the diameter of the hole in the mount, or what size housings will it take?

[mccarrot]

@mccarrott - what size is the diameter of the hole in the mount, or what size housings will it take?

The hole in the collimator mount is 11mm diameter.

[norty303]

Can you PM me the price of just the mini mount please, I can't see it on the site.

[taggalucci]

Can you PM me the price of just the mini mount please, I can't see it on the site.

Me too please, thanks very much

[mccarrot]

What is the focal length of your collimator? I suspect that using this will yield a less than satisfactory divergence..

4.1mm focal length.

[mccarrot]

Can you PM me the price of just the mini mount please, I can't see it on the site.

Some confusion here.

I have brass mini mount on my website, and these are the mounts where the reflect 532nm dichro's are mounted on. price, 20 euro/pc
see picture:


I also have the mount to fit the 11mm collimator, this mount will also cost 20 euro.

[dave]

4.1mm focal length.

One of the lenses I tried had a 4.5mm focal length and the divergence was above 3mrad.. Your lenses would be great for the Nichia 500mw's, or blu ray, but I don't think they are going to cut it for these diodes.. Would love you to prove me wrong tho

[affe]

I need to combine 445nm with my dual 473nm setup so PBS approach is out of reach for me. I found a nice dichro from Semrock, LM01-466-25:

http://www.semrock.com/Catalog/Detai...&CategoryID=83

Does anyone know how to get these in Europe (quantity 1)?

[alh5131]

I need to combine 445nm with my dual 473nm setup so PBS approach is out of reach for me. I found a nice dichro from Semrock, LM01-466-25:

http://www.semrock.com/Catalog/Detai...&CategoryID=83

Does anyone know how to get these in Europe (quantity 1)?

Semrock sells through distributors in Europe. Check the link below to see where to find the appropriate distributor:

http://www.semrock.com/ContactUs/Eur...d_Middle_East/