Page 1 of 5 12345 LastLast
Results 1 to 10 of 44

Thread: dt40pro vs scanlsp-30

  1. #1
    Join Date
    Oct 2009
    Location
    sweden
    Posts
    116

    Question dt40pro vs scanlsp-30

    which have the highest quality,
    dt40pro or scanlsp-30?

  2. #2
    Join Date
    Jan 2007
    Location
    Sheepsville, Wales, UK
    Posts
    3,406

    Default

    I stopped selling scanpros becuase I had trouble with every set - have sold many times more DTs and not one problem/complaint from a customer. DTs also have 2 year warranty - even CTI don't match that.

    Rob
    If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
    -----------------------------------------------------------------------------------------------
    Laserists do it by the nanometre.

    Stanwax Laser is a Corporate Member of Ilda

    Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
    www.photoniccleaning.co.uk

  3. #3
    Join Date
    Dec 2007
    Location
    Nottingham, UK
    Posts
    2,845

    Default

    +1 on the DT's. Very happy.

    The wide model of DT-40's is unreal!
    90+ degree scanning? Yes please!
    - There is no such word as "can't" -
    - 60% of the time it works every time -

  4. #4
    Join Date
    Jan 2007
    Location
    Sheepsville, Wales, UK
    Posts
    3,406

    Default

    Quote Originally Posted by danielbriggs View Post
    90+ degree scanning? Yes please!
    Perv!
    get back to harvesting blues or ya know what I will send round!

    Rob
    If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
    -----------------------------------------------------------------------------------------------
    Laserists do it by the nanometre.

    Stanwax Laser is a Corporate Member of Ilda

    Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
    www.photoniccleaning.co.uk

  5. #5
    Join Date
    Dec 2007
    Location
    Nottingham, UK
    Posts
    2,845

    Default

    Quote Originally Posted by stanwax View Post
    Perv!
    get back to harvesting blues or ya know what I will send round!

    Rob
    Not a clue.

    Harvesting blues? Done enough of that...
    I'm crying into a dead SSD at the mo
    - There is no such word as "can't" -
    - 60% of the time it works every time -

  6. #6
    Join Date
    Oct 2009
    Location
    sweden
    Posts
    116

    Default

    what´s the input beam height on the dt40?

  7. #7
    Join Date
    Dec 2007
    Location
    Bromley, Kent, UK
    Posts
    201

    Default

    DT40s are superb but, scanlsp`s are not scanpro or scaneco`s. DT40pro`s are a lot more that scanlsp`s so you would expect better quality. Dave from Lasershowparts did rate them quite well when they first came out, as did many other members here.

    http://www.photonlexicon.com/forums/...ead.php?t=8660

    Its down to how much you can spend.

  8. #8
    Join Date
    Jan 2007
    Location
    Sheepsville, Wales, UK
    Posts
    3,406

    Default

    Quote Originally Posted by teknofon View Post
    what´s the input beam height on the dt40?
    DTs use the lowest block height Ive seen - 19mm to the X mirror. If you come in from the other side (reversing the axes) its about 26mm

    Rob
    If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
    -----------------------------------------------------------------------------------------------
    Laserists do it by the nanometre.

    Stanwax Laser is a Corporate Member of Ilda

    Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
    www.photoniccleaning.co.uk

  9. #9
    Join Date
    Oct 2009
    Location
    sweden
    Posts
    116

    Default

    i´m not looking for speed
    i´m looking for a workhorse

    maybe some speed
    i currently have ct-6810s but i only get them up to 16k
    probably because of the large mirrors (9mm x 19mm)

  10. #10
    Join Date
    Oct 2009
    Location
    sweden
    Posts
    116

    Default

    how do i match the height with my spectra physics 168 or my alc-60

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •