Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Laserman532 5 Watt 445 Laser

  1. #1
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,348

    Default Laserman532 5 Watt 445 Laser

    haha made ya look. anyway i made up this quad to incorporate the new adjustable micromounts. I left a 1 x 3" space in the back for people to put terminal strips or what not in there. Two flexmods allow the maximum current to be pumped out. It will be completely black anodized with all hardware included.

    4 x 4.75 It is not the worlds smallest but it is available June 29.

    PM me if you are interested.
    Pat B on alt.lasers


    Visit My Site

    laserman532 on ebay
    laserman532 on LPF

    Been there, done that, got the t-shirt & selling it in a garage sale.

  2. #2
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,348

    Default

    forgot to add these crappy pictures.
    Attached Thumbnails Attached Thumbnails Quad With MicroMounts & Dual Flexmods.JPG  

    Picture 034.jpg  

    Pat B on alt.lasers


    Visit My Site

    laserman532 on ebay
    laserman532 on LPF

    Been there, done that, got the t-shirt & selling it in a garage sale.

  3. #3
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,365

    Default

    that's a nice looking piece of kit....

    Quote Originally Posted by Laserman532 View Post
    forgot to add these crappy pictures.
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  4. #4
    Join Date
    May 2008
    Location
    nerdtown, USA
    Posts
    1,165

    Default

    It is kind of similar to my evil hack. That has the flex mounts instead.

    Click image for larger version. 

Name:	DSCF1471.JPG 
Views:	149 
Size:	36.1 KB 
ID:	17951

  5. #5
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,348

    Default

    pretty color

    forgot to mention...im banging out a few of these to go into anodizing with other stuff and SHIP JUNE 29. PM me to claim your spot. I will only make 4 for this run!
    Pat B on alt.lasers


    Visit My Site

    laserman532 on ebay
    laserman532 on LPF

    Been there, done that, got the t-shirt & selling it in a garage sale.

  6. #6
    Join Date
    Dec 2007
    Location
    The West
    Posts
    1,241

    Default

    Quad?? Now were talking!
    what about cooling?, is there any cutout for a tec underneath?
    this should yield around 3-4 watts right?
    whats pricing?
    RGB laser projectors
    Pangolin Beyond .NET
    APC40 Midi controllers
    Pangolin FB3 controllers
    DZ splitter
    LS MegaWatt Green Machine

  7. #7
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,348

    Default

    Quote Originally Posted by carlos3621 View Post
    Quad?? Now were talking!
    what about cooling?, is there any cutout for a tec underneath?
    this should yield around 3-4 watts right?
    whats pricing?
    as you can see... I machined one hole in each corner...you would mount the plate to another "thing" with the TEC's Between the two. Another member is running a quad with no cooling, im not sure if future plans are to...but I provide the holes should you decide to go that way.

    I am taking orders with no cube or flexmods for $325.00. If you get your order in today it will ship June 29...everything black anodized.
    Pat B on alt.lasers


    Visit My Site

    laserman532 on ebay
    laserman532 on LPF

    Been there, done that, got the t-shirt & selling it in a garage sale.

  8. #8
    Join Date
    Jun 2009
    Location
    Texas, USA
    Posts
    50

    Default

    I was wondering something, and I'm sure it's a dumb question, but...

    How do you get all 4 beams to line up, if there is only 2 steerable beams?
    I can see how 3 line up, but what about the 4'th one?

  9. #9
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,348

    Default

    Quote Originally Posted by CrazyMonkey View Post
    I was wondering something, and I'm sure it's a dumb question, but...

    How do you get all 4 beams to line up, if there is only 2 steerable beams?
    I can see how 3 line up, but what about the 4'th one?
    in the first picture the aixiz holder in the top right corner is your reference...once that dot is pointed on the wall...it dosnt move...the other three align to him.
    Pat B on alt.lasers


    Visit My Site

    laserman532 on ebay
    laserman532 on LPF

    Been there, done that, got the t-shirt & selling it in a garage sale.

  10. #10
    Join Date
    Jun 2009
    Location
    Texas, USA
    Posts
    50

    Default

    I meant to say, 2 are steerable, 2 are stationary. Doh!, I guess if you tweak the PBS then you can get the 2 stationary beams aligned.. Then the steerable ones. maybe Ill think first next time.
    I likey.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •