Results 1 to 4 of 4

Thread: WTB: Stan_ham complete, kit or PCB!

  1. #1
    Join Date
    Nov 2007
    Location
    Cairns, Australia
    Posts
    1,896

    Default WTB: Stan_ham complete, kit or PCB!

    SInce Drlava is out of flexmods, and will be for a while, I need something to drive my 445nm diode. I have tried twice to make a stanham on protoboard, as well as my cardboard PCB, but neither have worked. SO I am looking for either a bare PCB, stan_ham kit, or even a completed working one. I know a place where I can get the boards for around $8, but they would have a lead time, so I thought I'd ask around here first.

    Or, if you have a flexmod

    EDIT: Found a driver

    Cheers,
    Dan
    Last edited by Things; 06-22-2010 at 05:08.

  2. #2
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default

    Ouch, that sucks dude. Don't give up. Are you sure you checked all your components to see if they were good? You could have a bad transistor or something. I'd suggest trying to build the circuit again on a breadboard and check your values. You may be missing something simple, god knows it's happened to me before.

  3. #3
    Join Date
    Dec 2007
    Location
    NorCal / Western Caribbean
    Posts
    710

    Default

    Hey Dan,

    What driver did you end up getting/using?

    Cheers
    Rich

  4. #4
    Join Date
    Nov 2007
    Location
    Cairns, Australia
    Posts
    1,896

    Default

    Hi Rich, I found a die4drive

    Cheers,
    Dan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •