Laserman532 445 "Four Banger" Knife Edge Kit

[Laserman532]

Laserman532 445 "Four Banger" Knife Edge Kit

Base plate is machined in corners for mounting a TEC to your supplied heat sink. (patent pending)

Beam Height Above Surface = 1"

Features Explained- (what is included)
1 - One ea. 6" x 3.0" x .25" Black Anodized Base / Mounting Plate
2 - Four ea. Single Aixiz Mounting Module featuring CLAMP STYLE, SLIDE, ROTATE & INSULATE Technology
3 - Four ea. Ultra Small Adjustable MircoMount by MicroLaserLabs.com
4 - Four Front Surface Mirrors .5 x .5 Included (dielectric mirror upgrade $40.00)
5- All necessary hardware to mount all the parts will be included
6- NO Aixiz Modules, Laser Diodes or Lasorb's will be supplied with this kit
7- NO Flexmods ship with this kit However the holes are there for you when you need.

Layout was designed around a 2mm beam diameter. The design is flexible enough to accommodate 1mm to 4 mm beams depending on which lens system you choose.

I have made a order of parts to build a four assemblies. First Come First Served. Ships June 29.

Complete Kit Price - $300.00

(international shipping add $10.00)

Kits will be processed in order received.

Thanks for looking!

[Laserman532]

Is there any interest in a 8 banger with a PBS cube? im just sayin...

4 designs in three days, parts to build, 17 of two types of duals, 5 quads, 4 four bangers...im tired its been a rough few days

[CrazyMonkey]

Awesome stuff Laserman532!

There is only one thing Id like to see added to you kits, which for me
makes a big difference. Some kind of beam shaping built in. Don't
know how to do it best myself.. Also guessing it may increase the cost
of a kit quite a bit! But I think your work is as good as it gets!

And about the 8 banger.. Of course, since when is more not better

ooh.. you need pic's of these in use..
It would probably be considered porn though..

[Laserman532]

Awesome stuff Laserman532!

There is only one thing Id like to see added to you kits, which for me
makes a big difference. Some kind of beam shaping built in. Don't
know how to do it best myself.. Also guessing it may increase the cost
of a kit quite a bit! But I think your work is as good as it gets!

And about the 8 banger.. Of course, since when is more not better

ooh.. you need pic's of these in use..
It would probably be considered porn though..

yeah, it seems like everybody says they have the ultimate solution for beam shaping...so thats why I dont provide it...but once it gets figured out...how long do you think it will take me to implement it I dont waste time waiting around. You notice, i very rarely sell glass...too many variables

and yes anything you do...adds cost...but as usual I NEVER CHARGE ANYTHING for materials or components or hardware...I only charge for the holes and each one is hand made with love by me personally.

I could have the eight banger done in a day or two (actually about 1 hour), but them holes are kinda pricey. I would like to see someone say...I'll buy one...The octomom got taken apart because everyone talked about it, but no one did it, or they just like talking.

[allthatwhichis]

I would like to take an octomom and build a full RRGB out of it; I got no flow for it tho. 2x640s, 4x660s, 1x532, and 1x445. Might need a broadband PBS and a couple of dichros instead of mirros, but I think it would work well. The kicker might be finding a green that is powerful enough and still fit in the mount.

[Laserman532]

I would like to take an octomom and build a full RRGB out of it; I got no flow for it tho. 2x640s, 4x660s, 1x532, and 1x445. Might need a broadband PBS and a couple of dichros instead of mirros, but I think it would work well. The kicker might be finding a green that is powerful enough and still fit in the mount.

Well What you need is more something like this. This was meant to be 2 x640 1 x 532 1 x 445 1x405...*puts thinking cap on...going to add 4 x 660

[sugeek]

Awesome stuff Laserman532!

There is only one thing Id like to see added to you kits, which for me
makes a big difference. Some kind of beam shaping built in. Don't
know how to do it best myself.. Also guessing it may increase the cost
of a kit quite a bit! But I think your work is as good as it gets!
..

You don't need no beam shaping optics!


HEROIC's RIG - it is too pretty not to share... 2mm^2 @ 10m

-Adam

[allthatwhichis]

You don't need no beam shaping optics!


HEROIC's RIG - it is to pretty not to share...

-Adam

That rig is pretty awesome but that dot needs some help man, don't lie... It's got ass hanging out all over the place.

[Laserman532]

That rig is pretty awesome but that dot needs some help man, don't lie... It's got ass hanging out all over the place.

haha that is a gnarly dot...but hell...if you wiggle it fast enough no one will notice

[carlos3621]

Four banger looks good, somebody on here was able to get a 4x1 mm beam, perfect for this layout..... Decisions decisions......