Results 1 to 3 of 3

Thread: flexmod mounting hole

  1. #1
    Join Date
    Dec 2007
    Location
    NorCal / Western Caribbean
    Posts
    710

    Default flexmod mounting hole

    Is there any reason why I cannot enlarge the hole in the transistor thingy on the flexmod? I snapped my 3mm tap and it will take a while to get one shipped out to me. Could I enlarge the hole slightly so I can use an M4 bolt/screw instead???

    Thanks in advance.

    Cheers
    Rich

  2. #2
    Join Date
    Dec 2006
    Location
    denver,co
    Posts
    1,078

    Default

    Yea you could you just have to be careful. That metal is soft and it will tend to grab. Start with the smallest size bigger and work your way up. Remember f you destroy that part you will have to wait for a replacement for that part too.

    Use a pair of vice grips on the end of the tab or better yet a vice when you drill the hole.


    chad


    When the going gets weird, the weird turn pro.


  3. #3
    Join Date
    Dec 2007
    Location
    NorCal / Western Caribbean
    Posts
    710

    Default

    Thanks for the advice Chad.

    I'll give it a go a little later this afternoon.

    Cheers
    Rich

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •