Results 1 to 8 of 8

Thread: hello and help please

  1. #1
    Join Date
    Jun 2010
    Location
    banbury in UK
    Posts
    3

    Default hello and help please

    Hi All,

    Let me start by introducing myself...

    My name is Sean and i live in banbury in the UK, i have been into laser from the 80's were i built 2 He.Ne laser up and were used in a disco setup.

    By trade i am a electronics engineer and have built projects in the past, i have purchased of ebay a lasershow pro20k scanner set and ilda/dmx control board for £55 inc p&P, also a 100mw red laser with TTL from Odicforce at £17 P&P.

    I Know that these parts are not the best but we all need to start somewhere, I'm just building the LPT DAC for popelscan but what i wanted was an old copy of NLS software as the new version does not support LPT output.

    So could anyone point me in the right direction or email me an old version, i would be very greatful.

    well that all for the minute, i will post some pics at a later time, hope this was posted in the right place.

    thanks for looking
    Sean

  2. #2
    Join Date
    Jul 2005
    Location
    Lancashire UK
    Posts
    1,379

    Default

    Hi Sean and welcome to this place of many photons

    sorry i can not help you with the popel scan but im sure someone will here will be able to

    all the best


    Karl

  3. #3
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,280

    Default norms dac

    hi and welcome to the forum
    this might be your lucky day i have norms lpt dac if you want it and may still have the software,if i dont ,you could drop norm an email, i am sure he will send you a copy
    but the dac there if you want it

    Quote Originally Posted by sean.m View Post
    Hi All,

    Let me start by introducing myself...

    My name is Sean and i live in banbury in the UK, i have been into laser from the 80's were i built 2 He.Ne laser up and were used in a disco setup.

    By trade i am a electronics engineer and have built projects in the past, i have purchased of ebay a lasershow pro20k scanner set and ilda/dmx control board for £55 inc p&P, also a 100mw red laser with TTL from Odicforce at £17 P&P.

    I Know that these parts are not the best but we all need to start somewhere, I'm just building the LPT DAC for popelscan but what i wanted was an old copy of NLS software as the new version does not support LPT output.

    So could anyone point me in the right direction or email me an old version, i would be very greatful.

    well that all for the minute, i will post some pics at a later time, hope this was posted in the right place.

    thanks for looking
    Sean

  4. #4
    Join Date
    Jun 2010
    Location
    banbury in UK
    Posts
    3

    Default

    thanks for all your help

    sean
    He who dies with the most toys wins

  5. #5
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,280

    Default here you go sean

    Click image for larger version. 

Name:	DSC00756.JPG 
Views:	17 
Size:	864.5 KB 
ID:	18224
    here you go sean a couple of pics
    of whats coming your way f.o.c
    the reds a bit weak on that driver
    but the green pack a punch about 80/90mw
    if you put the red on a proper driver like one of robin die4drive
    and set it up right it will poke out 220mw with the lens it has
    swap the lens for a glass aixiz and 250mw
    enjoy and have fun with it
    important thing is when you fix them to a base plate they can not touch ground or each other or they will turn into a red and green led's so be carefull

    Click image for larger version. 

Name:	DSC00755.JPG 
Views:	14 
Size:	842.2 KB 
ID:	18223

  6. #6
    Join Date
    Jun 2010
    Location
    banbury in UK
    Posts
    3

    Default

    Thank you for this

    were in the UK is best for parts, laser, dichro, holders etc.

    regards and very thankful

    Sean
    He who dies with the most toys wins

  7. #7
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,280

    Default

    Quote Originally Posted by sean.m View Post
    Thank you for this

    were in the UK is best for parts, laser, dichro, holders etc.

    regards and very thankful

    Sean
    stanwax is where most on here in the uk goto
    check on laserwave-uk
    also pm sent

  8. #8
    Join Date
    Jul 2005
    Location
    Lancashire UK
    Posts
    1,379

    Default

    wow badger ... you are a true gent ...

    its nice to see that someone is getting a couple of rungs up on the laser ladder ...

    also Sean ...

    I must compliment you on a good 1st post ... its nice to see you introduce yourself .. tell us where you are from ... and a bit about your skills ....

    so many people miss this ... and i always believe that first impressions are very important .... well done mate ... and enjoy your lasers

    oh and Rob ( stanwax ) is your best bet for laser parts and reliable advice

    all the best ...

    Karl

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •