I have just been given the OK to sell these large laser enclosures. These were originally designed to house an ALC60X, power supply, scanners colour box and diffraction grating. Therefore with some carefull component placing, you should be able to easily assemble an RGB system in these.
There are mounting points for an internal sub chassis 50 x 27 cm. Usable height above this is 12-16 cm (because of the tapered design). There is also space under the chassis of 35 x 27 x 5.5 cm for mounting power supplies etc.
A few of these still have the internal extended chassis designed to hold ALC60's. There is also a piece of cut glass (standard) for the front aperture.
There are 12 available, but as I am having 2, there are only 10 left.
Dimensions are-
Length: 51cm
Width: 28cm
Height: 22cm
These are made from 1.5mm steel and finished with a textured paint finish. No hanging yokes are supplied, although the mounting holes are present. I used one of these before with a 60X and made a yoke from 3mm steel bar without any problems.
Price for these is £125 each, or 2 for £235.
Carriage is £10 for 1 or £15 for 2.
I cannot ship these until after 5th January as I have run out of large boxes and that is when I return to work.