My power supply has died .Does anyone have a spare they would sell?
thanks Bill
My power supply has died .Does anyone have a spare they would sell?
thanks Bill
Pangolin FB3
DT40 PRO
200mw 635nm LASERWAVE
200mw 532nm CNI
100mw 473nm CNI
POLY 20 / GAS ARGON (SELEM BLUE)
LASERS MAKE ME GRIN
Holla at Marc or DZ; DZ might have one but Marc should definatly have one.
Love, peace, and grease,
allthat... aka: aaron@pangolin
Hey Bill, I don't have spares anymore. Send a PM to gottaluvlasers, he should be able to hook you up. They are relatively inexpensive, if I remember correctly.
Hello
Thanks DZ and Allthat for the advice. I have talked to Marc, and ordered another set of DT-40s.I am planning another single color projector(like Stukas Jolly Green) so I'll need another set of scanners sooner or later.I was worried there might be something else wrong with my scanners besides the power supply, so this will get me back up and lasering.
Thanks again for your help
Bill
Pangolin FB3
DT40 PRO
200mw 635nm LASERWAVE
200mw 532nm CNI
100mw 473nm CNI
POLY 20 / GAS ARGON (SELEM BLUE)
LASERS MAKE ME GRIN
Bill-
Why dont you give me a call tonight. After 5-6. I will check to see if i have a spare supply. I dont think i do actually.but i will check when i get back to CT. (away right now). If i have a spare, ill just send it with your new scanners. these +24V/-24V power supplies are a pain in the arse to get!
-Marc
ILDA- U.S. Laser Regulatory Committee
Authorized Dealer for:
- Pangolin Laser Software and Hardware
- KVANT Laser Modules & Laser Systems
- X-Laser USA
- CNI Lasers
- Cambridge Technology & Eye Magic Professional Scanning Systems
FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems
Hi Marc,
No hurry about yhe power supply. I'll be putting the new scanners in my current projectorand putting the old scanners on the shelf for awhile until I can aquire the rest of the parts for my second projector. thanks alot for all the help
bill
Pangolin FB3
DT40 PRO
200mw 635nm LASERWAVE
200mw 532nm CNI
100mw 473nm CNI
POLY 20 / GAS ARGON (SELEM BLUE)
LASERS MAKE ME GRIN
You could always use 2 seperate 24v supplies to get the split rails.. Just a option :-)
KVANT Australian projector sales
https://www.facebook.com/kvantaus/
Lasershowparts- Laser Parts at great prices
https://www.facebook.com/lasershowparts/
just out of curiosty, WHY are these +24V/-24V supplies like almost unheard of with power supply manufacturers?
Seems like a pretty common supply needed. Am i wrong?
ILDA- U.S. Laser Regulatory Committee
Authorized Dealer for:
- Pangolin Laser Software and Hardware
- KVANT Laser Modules & Laser Systems
- X-Laser USA
- CNI Lasers
- Cambridge Technology & Eye Magic Professional Scanning Systems
FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems
I would say because, other than running laser scanners, there isn't really a need for them. Most analogue chips don't use supply rails above +/-18v, and the real use for the LM3886 is audio, and you typically use a linear power supply with audio..
Just my thoughts, I might have missed something..
KVANT Australian projector sales
https://www.facebook.com/kvantaus/
Lasershowparts- Laser Parts at great prices
https://www.facebook.com/lasershowparts/