Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: 2 questions...

  1. #1
    Join Date
    May 2005
    Location
    Washington D.C.
    Posts
    105

    Default 2 questions...

    1). Does anyone know which pots do what on a cambridge 6580 driver?

    2). Does anyone know the correct way to wire a spider cable?.. (ie: 2 110vac household circuits, into 1 220vac plug) I have heard of such a thing, but could not find any diagrams for wiring it online. I have tried to do it, but successfully blew out my muiltimeter, and popped my breakers.

  2. #2
    Join Date
    Jun 2005
    Location
    SoCal
    Posts
    508

    Default

    Hi Jay, take a photo of your pots and I'll draw what they do over on top of them.

    In terms of AC, I strongly recommend paying a electrician to rig it for you.
    Since you can get electrocuted to death only once, you may as well aim for
    teslas. But in all seriousness, watch yourself.

    But for your information... (I really do recommend someone who knows
    what they're doing at least watching over you as you do this for the first time)

    For the spider box, the important thing to realize that you can't just
    take any two random 110VAC outlets... you must find the one that's
    out of phase!!! You're almost guaranteed that you can't use two outlets from
    the same recepticle. The spider box is a "trick" which takes advantage of
    the fact that when the utility companies send electricity to the house, it
    only transmitts 220VAC, the breaker/fuse box then splits the 220VAC into two
    110VAC lines which are out of phase.

    So chances are, you'll be running a long extension cord for one of the
    legs unless you're really lucky.

    The way to tell is to put your DMM into Voltage AC mode (make sure it's
    rated for 240VAC) take a long extension cord, plug it into the wall.
    Then plug the black wire into the upper right hand vertical plug (this is also
    often keyed as a small vertical plug vs the larger left hand plug) of the socket
    and electrical tape it so it won't slip out and electrocute anyone. You'll be
    wandering around the house now plugging that red wire into the upper right
    hand plug on each outlet looking for one that gives you 220V... You shouldn't
    have blown up your DMM unless you placed it into a mode that wasn't
    measuring Volts AC.

    After you find it, then just follow standard spiderbox plans... though I have
    to add one thing... while I have a commercially built spider box which I got
    in case I ever needed one, I've never had to use it... Just take it straight from
    the breaker/fuse box and you'll be 100% safer.

  3. #3
    Join Date
    May 2005
    Location
    Washington D.C.
    Posts
    105

    Default

    where can I find the plans?..

  4. #4
    Join Date
    Jun 2005
    Location
    SoCal
    Posts
    508

    Default

    http://www.laserfx.com/Backstage.Las.../Support2.html

    Ah, Sorry, I thought you were following this one. Also note that those
    small $5 yellow line testers with with three lights are NOT OPTIONAL.
    You must test the outlets to make sure they conform to spec, otherwise
    you'll have a tidy electrical fire on your hands

  5. #5
    Join Date
    May 2005
    Location
    Washington D.C.
    Posts
    105

    Default

    Okay, I'll grab one from work. When reading the plans, what do they mean by phases? Do they mean two different circuits (ie: Bedroom / Bathroom as long as they are different breakers)? I'll post a pic of the amp a little later, when I get a chance.

  6. #6
    Join Date
    May 2005
    Location
    Washington D.C.
    Posts
    105

    Default

    I guess I don't have the power at my apt to run this. Oh well I got to wait to get to work. I tried every circuit in the place, and they are all the same phase, so I'll I get on my DMM 120.

    The 6580's look like this:


    I yet to have a chance to take a picture yet. Will that do?..

  7. #7
    Join Date
    Jun 2005
    Location
    SoCal
    Posts
    508

    Default

    Sort of... If you look at the breaker box, you'll note that the mains (BIG wires)
    have three leads, two are sleeved and one is bare copper (or aluminum)

    The sleeved lines are both "hot" and the voltage difference between them is
    nominally 220VAC...

    The interesting thing is that if you measure from either "hot" wire and neutral,
    you'll get 110VAC...

    US code has consumer accessibly wiring running at a nominal 110-120VAC,
    so electricians divide the house between the two "legs" of the phase split.
    So parts of the house are on one phase and other parts are on another phase.
    We also refer to the split as "different circuits"

    What this means to you is that not all breakers will be on different phases.
    Although, depending on your model of breaker box, often the arrange it
    so that contiguous breakers will be on different circuits. But you will need
    to check with a multimeter to be sure.

    If you build that spider box EXACTLY as shown, then you can measure the
    voltage difference between the 220VAC live wires safely as long as nothing
    is plugged into the spider box at the time of testing (or plugging in).

  8. #8
    Join Date
    May 2005
    Location
    Washington D.C.
    Posts
    105

    Default

    Well I livr in an apartment, and It seems that there is no 220 outlet in the intire place. All the appliances are 110. My breaker box is inset into a plastered wall, so I have no way of ripping it open, and taking a look. Although I want to. Since I wanted only one outlet on the spiderbox, I never wired the neutrals together, I wonder if that has something to do with it. The funny thing is no matter what I hook it to, it always comes up at 120 on my DMM.

  9. #9
    Join Date
    May 2005
    Location
    Washington D.C.
    Posts
    105

    Default

    Well that worked, for about 3 seconds before the breaker popped. I got a reading from the DMM at 208, but then it cut off. Damn these 10 amp breakers. I figured out the phase situation(living room is on the black wire, kitchen is on the red and the meter confirmed 208), but before wiring the neutrals, I still only got 120. There was no load on the spider other then the volt meter when the breaker popped, I'm thinking the tied neutrals was not a good idea, even though the DMM got a 208 reading for 3 seconds. I think I'm done with tring to start this thing in the apt. I talked to one of the techs at work, and gave me 5 locations around the club to tap into, but told me that I would only get 208. I'm thinking of heading over there in about 15 minutes, but I need a hand to load the car, which I do not have at this momnet.It seems that DC's power only comes out at 208, so I hope that will work, and I won't need some sort of step up transformer. I hope this thing is more about the amps, not the volts.

  10. #10
    Join Date
    Jun 2005
    Location
    SoCal
    Posts
    508

    Default

    The combined neutrals are generally unnecessary as it makes the
    device prone to ground loops, however, combining the two shouldn't have
    caused the breakers to go off... I'd guess you were loading more than 10A
    of stuff over that 220V line, which would be trivial to do since people don't
    bother going to 220 unless they need more than 10A of juice (otherwise 110V
    and 20A would usually suffice)

    Also, one suggestion. Purchase a buck boost transformer... a 2KW unit
    costs $50-100... A "buck" will increase the voltage if the supply is lower
    than 220V and decrease voltage if supply is higher than 220V.... I guarantee
    this will save your systems a lot of times at places with interesting power.

    Also on those amps, I'll need a closeup pic if you can get me one... I don't
    have one of those units handy, but I can generally tell you what they are if
    I see the trimmers and what chips they're near.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •