I've decided to sell most of my laser show stuff. Don't worry, I'm keeping the 1W RGB projector and one of my QM2000's, but pretty much everything else has to go. Here's a quick list, pix and details to follow if there is interest.
UPDATED 8/13/10 - some stuff sold, some lower prices.
UPDATED 5/10/11 - pretty much all sold now
SOLD - 2 new CNI 1 watt 660nm red, set up for combining (H and V polarization) with high efficiency combiner plate
#2 - 3 watt 632nm diode laser in SDL-8110 chassis (diode driver and TEC all in 1 with nice remote control box). This is the same laser diode used in "Big Red", but in a much smaller package and w/o scanners. Makes the same 15mm beam with ~5mrad divergence. Check the wavelength - at 632nm, this is amazingly bright - $1500
SOLD - 1.75W green DPSS. Probably an older LambdaPro, but not positive. TTL modulation. As seen here http://www.photonlexicon.com/forums/...ead.php?t=7118
SOLD (laser only, scanset still available) - 3W Melles Griot green DPSS making >2.75W after beam combiner. Less than 50 hours on new pump diode installed by OneStop. Currently installed in a projector with 3 Cambridge 6800 for XY + blanking. $4500 in projector, $3500 by itself.
#5 - Brand new Cambridge 6800 scanset (scanners with mirrors, XY mount, 67xxx drivers, cables, all new in the original box) - $1200
SOLD - new Cambridge 6810 scanset - 2 scanners with small hene mirrors (will need to be replaced for show use), XY mount, CB6580 drivers. You'll need to make or buy cables. Great for larger mirrors 6-10mm beams - $550/set (several available)
SOLD - compact, high power 28V power supplies for Cambridge scanners - $ask
SOLD - Mobolazer ML10-300. 10 turret beam table with >250mW multiline argon. <500 hours on the laser. I know most of you are into scanning projectors, but this and a bunch of mirrors is usually way more impressive to the non laser geeks. Comes with a custom fitted road case, DMX-512 controller, and all cables. I'll include at least 8 adjustable bounce mirrors, several with diffraction gratings.
SOLD - Mobolazer ML-8 8 turret beam table with 5mW green laser and optional XY G-scan head. Works great, would be easy to upgrade to a higher power laser
#8 - Redline Beamscan - simple, cheap XY scanning projector with digital controller. Add your own laser. $300 ea (2 available)
SOLD - CDRH varianced Class 4 projector chassis with Cambridge 6800 scanset installed - $1500
SOLD - Pangolin FB3-SE eval kit - $575 ea / 2 available
SOLD - Pangolin LD2000 in Magma PCI enclosure with Cardbus laptop interface. Intro - $1500 or Pro $4000 (only selling 1 or the other)
SOLD - Full Auto + X29-2 laser show controller. Card installed in a small Dell PIII PC wired with ILDA DB-25 on back panel. Includes dongle for Full Auto and X29 w/o time limit. Can include a small flat panel display for cost of additional shipping - $1000
SOLD - MaXYZ 2x225mW red w/ analog blanking mounted to plate with mirror/combiner cube. Works great.
SOLD - >100mW multiline argon system. ALC 60X or Omnichrome 532 head with Omnichrome 150/155/160 power supply and umbilical. I used to have dozens of these systems and kept only the very nicest, low hours units. $400 ea / several available.
I'm sure there is more, but this ought to be enough to get started Prices are somewhat negotiable and don't include shipping. I know how to pack this stuff so it won't get damaged in shipping and I only charge actual cost for shipping, no packing or "handling" charged added. International shipping is OK, but must be fully insured and thus declared for the full value. Everything is guaranteed to arrive in good working condition.