Urgent, need dimensions and mounting data to CAD a FB3SE with DMX into a box.
Looking at the Pango web site right now, but if some one has it... I'd appreciate it.
Thanks, Steve
Urgent, need dimensions and mounting data to CAD a FB3SE with DMX into a box.
Looking at the Pango web site right now, but if some one has it... I'd appreciate it.
Thanks, Steve
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...
I'm opening mine up right now to get you the exact dimensions. Will take a minute.
Board dimensions are 1.20" x 3.25" Hole spacing on my board is 1.890" x 2.950" height of the whole board from bottom board to top of USB port is .780" USB port is central. The xd card is located in line with the left side of the USB port and extends to the right 1" Top of the XD card is .600" from the top of the USB port. Let me know what else you need.
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...
Steve,
The board thickness is .057". I actually tapped the holes in the brass out to a 5-40 thread and I was able to do so without drilling them. I can only estimate the holes to be slightly larger than the diameter of a 38 drill (.101"). I would guess them to be .105" based on the way they tapped. If you PM me your email, I would be happy to email you pics of the box I built.
I'm glad to help a guy like you Steve.
Ian
And the dimensions are in mm (cause I think the FB3 was designed in europe ...)
yes those damn inches