Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: FB3 dimensions. Urgent.

  1. #1
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,890

    Default FB3 dimensions. Urgent.

    Urgent, need dimensions and mounting data to CAD a FB3SE with DMX into a box.

    Looking at the Pango web site right now, but if some one has it... I'd appreciate it.

    Thanks, Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  2. #2
    Join Date
    Jun 2010
    Location
    Somerset, KY
    Posts
    224

    Default

    I'm opening mine up right now to get you the exact dimensions. Will take a minute.

  3. #3
    Join Date
    Apr 2010
    Location
    Grand Rapids, Mi
    Posts
    2,538

    Default

    Quote Originally Posted by mixedgas View Post
    Urgent, need dimensions and mounting data to CAD a FB3SE with DMX into a box.

    Looking at the Pango web site right now, but if some one has it... I'd appreciate it.

    Thanks, Steve
    Pango's dimensions of "Credit-card sized board" are not accurate enough?

    lol
    leading in trailing technology

  4. #4
    Join Date
    Jun 2010
    Location
    Somerset, KY
    Posts
    224

    Default

    Board dimensions are 1.20" x 3.25" Hole spacing on my board is 1.890" x 2.950" height of the whole board from bottom board to top of USB port is .780" USB port is central. The xd card is located in line with the left side of the USB port and extends to the right 1" Top of the XD card is .600" from the top of the USB port. Let me know what else you need.

  5. #5
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,890

    Default

    Quote Originally Posted by ireedz View Post
    Board dimensions are 1.20" x 3.25" Hole spacing on my board is 1.890" x 2.950" height of the whole board from bottom board to top of USB port is .780" USB port is central. The xd card is located in line with the left side of the USB port and extends to the right 1" Top of the XD card is .600" from the top of the USB port. Let me know what else you need.
    Bingo! Thank You!!

    Two small questions, ? Thickness of raw green pcb? Hole diameter?

    Bless you!

    Steve
    Last edited by mixedgas; 08-27-2010 at 16:44.
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  6. #6
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,890

    Default

    Quote Originally Posted by polishedball View Post
    Pango's dimensions of "Credit-card sized board" are not accurate enough?

    lol

    I wish I was that good. But unlike the chick Sting! sings about, NOT "Everything I do is Magic, Magic, Magic," by a long shot!

    Measure twice, cut once, visit purchasing, do paperwork, wait! reorder stock, repeat!

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  7. #7
    Join Date
    Jun 2010
    Location
    Somerset, KY
    Posts
    224

    Default

    Quote Originally Posted by mixedgas View Post
    Bingo! Thank You!!

    Two small questions, ? Thickness of raw green pcb? Hole diameter?

    Bless you!

    Steve
    Steve,

    The board thickness is .057". I actually tapped the holes in the brass out to a 5-40 thread and I was able to do so without drilling them. I can only estimate the holes to be slightly larger than the diameter of a 38 drill (.101"). I would guess them to be .105" based on the way they tapped. If you PM me your email, I would be happy to email you pics of the box I built.

    I'm glad to help a guy like you Steve.

    Ian

  8. #8
    Join Date
    Oct 2009
    Posts
    43

    Default

    quick solidworksClick image for larger version. 

Name:	FB3 SE.JPG 
Views:	40 
Size:	101.4 KB 
ID:	19083Click image for larger version. 

Name:	FB3 SE.PDF 
Views:	11 
Size:	30.0 KB 
ID:	19084

  9. #9
    Join Date
    Jan 2008
    Location
    Belgium
    Posts
    1,009

    Default

    And the dimensions are in mm (cause I think the FB3 was designed in europe ...)

  10. #10
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,580

    Default

    yes those damn inches

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •